Communicate with Supplier? Supplier
Sun Mr. Sun
What can I do for you?
Chat Now Contact Supplier

Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD

Aluminium Black Anodized - manufacturer, factory, supplier from China

(Total 24 Products for Aluminium Black Anodized)

  • Black Anodized Aluminium Metal

    Black Anodized Aluminium Metal

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-094

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    The method of powder spraying has both good performance and satisfactory color but it has slightly regret by a thick layer of powder obscured the metallic sheen Aluminium black anodized just makes up for that regret The fresh oxide film obtained after Aluminium black anodized can be disposed of in a timely colour...

    Contact Now

  • CNC Milling Machining Small Aluminium Spare Parts

    CNC Milling Machining Small Aluminium Spare Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-083

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Small Aluminium Spare Parts Aluminum alloy has good mechanical properties small density good conductivity and thermal conductivity so aluminium spare parts are widely used in industry The strength and hardness of aluminum alloy are low and the cutting load is small Due to the good thermal...

    Contact Now

  • Surface Treatment for Aluminium CNC Parts

    Surface Treatment for Aluminium CNC Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-215

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Surface Treatment for Aluminium CNC Parts There are many different forms of small aluminium parts surface treatment such as sandblasting to form a matte pearl silver surface polishing to form a mirror surface embossing pressing out various textures plating covering other metals spraying covering other non metallic...

    Contact Now

  • High Precision CNC Milling Custom Aluminium Products

    High Precision CNC Milling Custom Aluminium Products

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-204

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Precision CNC Milling Custom Aluminium Products This is a customized heating module for round bottom flasks processed according to customer requirements This custom aluminium products chooses non sand hole aluminium block with good thermal conductivity for high precision CNC milling aluminium alloy so this custom...

    Contact Now

  • High Speed CNC Milling Aluminium Alloy

    High Speed CNC Milling Aluminium Alloy

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-074

    • Productivity: 4600/Month

    High Speed CNC Milling Aluminium Alloy Milling aluminium alloy generally uses three edge aluminium milling cutters followed by two edge ball nose cutters or four edge flat bottom cutters due to different machining conditions High speed milling aluminium and large feed milling aluminium alloy is generally available for...

    Contact Now

  • High Speed CNC Milling Aluminium Blcok

    High Speed CNC Milling Aluminium Blcok

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-073

    • Productivity: 4600/Month

    High Speed CNC Milling Aluminium Blcok This product is machined by high speed CNC milling machining method Because this product needs large quantity and has high precision and quality requirements we adopt the method of casting aluminum blocks close to the shape of the product and then do aluminum block milling which...

    Contact Now

  • High Speed Machining 6061 Aluminium Parts

    High Speed Machining 6061 Aluminium Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-201

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Speed Machining 6061 Aluminium Parts Aluminium alloy material is soft so in high speed machining aluminium cutting force should not be too large otherwise deformation will occur on the CNC machined aluminium parts When clamping stress should be avoided as far as possible Otherwise the tolerance of size and...

    Contact Now

  • Precision CNC Fabrication Aluminium Clamp Parts

    Precision CNC Fabrication Aluminium Clamp Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-200

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision CNC Fabrication Aluminium Clamp Parts This is an aluminium clamp made of 6061 aluminium material As can be seen from the following machining videos our engineer designed four aluminium fabrication parts with a rectangular piece of aluminium block In the process of CNC cutting aluminium two pieces of...

    Contact Now

  • CNC Machined Aluminum Telescope Parts With Purple Anodized

    CNC Machined Aluminum Telescope Parts With Purple Anodized

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-199

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machined Aluminum Telescope Parts With Purple Anodized The matters needing attention in the process of anodizing aluminum service are as follows 1 Reasonable control of anodic oxidation process conditions including solution temperature voltage and time 2 In the anodizing aluminum process attention should be paid...

    Contact Now

  • Cnc Lathe Turning Components With Anodized

    Cnc Lathe Turning Components With Anodized

    • Min. Order: 1 Bag/Bags

    • Model No.: TU-007

    • Productivity: 52000/Month

    • Transportation: Ocean,Land,Air

    This CNC lathe turning components is made of 6061 aluminum alloy According to customer s requirements we have made two different blue anodize surface treatments for CNC lathe turning components Machining process CNC turning and CNC cutting first turning then rough and finish machining according to the size tolerance...

    Contact Now

  • Precision CNC Machined Aluminium Parts For Telescope

    Precision CNC Machined Aluminium Parts For Telescope

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-070

    • Productivity: 4600/Month

    Precision CNC Machined Aluminium Parts For Telescope This is a handheld telescope structure bracket Red anodizing of aluminium is used as the surface treatment It can also have a very beautiful color after increasing the anti oxidation and anti friction performance of the surface The bracket needs a certain degree of...

    Contact Now

  • Rapid CNC Machining Aluminium Alloys

    Rapid CNC Machining Aluminium Alloys

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-198

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Rapid CNC Machining Aluminium Alloys Aluminium alloy material is soft so in CNC machining auminium cutting force should not be too large otherwise deformation will occur When do clamping process in CNC machining aluminium stress should be avoided as far as possible Otherwise the tolerance of size and position can...

    Contact Now

  • Precision Turned Red Anodized Aluminum Bike Parts

    Precision Turned Red Anodized Aluminum Bike Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-197

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision Turned Red Aluminum Bike Parts The turned aluminum bike parts are machined by using CNC turning machine to machining a whole aluminum bar Because the whole process of CNC aluminum machining is completed in one clamp before cutting off because turned aluminum bike parts are connected with the bottom of the...

    Contact Now

  • Machined Aluminum Parts with Clear Anodized Finish

    Machined Aluminum Parts with Clear Anodized Finish

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-193

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machined Aluminum Parts with Clear Anodized Finish After clear anodized finish the surface of machined aluminum aircraft parts can get a layer of dense film from tens of micrometers to even hundreds of micrometers that is much thicker than natural oxide film This artificial oxide film is then subjected to a sealing...

    Contact Now

  • CNC Turning Machining Aluminium

    CNC Turning Machining Aluminium

    • Min. Order: 1 Bag/Bags

    • Model No.: tu-059

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Turning Machining Aluminium When CNC turning machining aluminium plate if the technological arrangement is reasonable the auxiliary time in production can be reduced and the production efficiency can be improved The dimension precision and the tolerance of shape and position of the machined aluminium plate are...

    Contact Now

  • Aluminum Hard Anodized Finish

    Aluminum Hard Anodized Finish

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-078

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Non ferrous metals or their alloys such as aluminum magnesium and their alloys can be hard anodized finish there are many micropores in the oxide film of hard anodised aluminum can adsorb a variety of lubricants suitable for the manufacture of engine cylinders or other wear parts Hard anodised aluminum membrane...

    Contact Now

  • Clear Anodized Surface Treatment Aluminum Products

    Clear Anodized Surface Treatment Aluminum Products

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-190

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Clear Anodized Surface Treatment Aluminum Products This machined aluminum product has been treated with aluminum clear anodized oxidation finish Aluminum clear anodized finish is an important way for the surface treatment of machined aluminum products In the process of aluminum clear anodized finish the machined...

    Contact Now

  • Precision Machining Turning Aluminium Parts

    Precision Machining Turning Aluminium Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: TU-057

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Precision Machining Turning Aluminium Parts Machining turning aluminium technology is a more traditional type of work Machining turning aluminium technology is an important means of mechanical machining it is very common in enterprise production The selection of cutting tools in the processing of machining turning...

    Contact Now

  • Custom CNC Machining Aluminium Parts Services

    Custom CNC Machining Aluminium Parts Services

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-058

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Custom CNC Machining Aluminium Parts Services The process of custom CNC machining parts includes knife walking tool changing speed changing changing direction parking and so on Custom CNC machining parts is widely used in modern mold manufacturing For different machining drawings machining quantities and machining...

    Contact Now

  • Milling Machining Aluminium Components

    Milling Machining Aluminium Components

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-053

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Milling Machining Aluminium Components Many mechanical equipment is made up of a large number of aluminium machined components The errors produced in the machining aluminium components process will be accumulated which has a great influence on the machining quality of the mechanical equipment So in machining aluminium...

    Contact Now

  • Custom CNC Milling Precision Aluminium Parts

    Custom CNC Milling Precision Aluminium Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-049

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Custom CNC Milling Precision Aluminium Parts Precision milling aluminium is a process that uses machining equipment to change the size shape or performance of the workpiece Precision milling aluminium provides a variety of aluminium parts for industrial production providing a variety of aluminium products for people s...

    Contact Now

  • Machining Aluminum Anodized Parts for Hose Adaptor

    Machining Aluminum Anodized Parts for Hose Adaptor

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-172

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Machining Aluminum Anodized Parts for Hose Adaptor At machining anodized parts there are sometimes quality problems such as deep and shallow of the workpiece color for example The quality of machining anodized parts is related to the voltage temperature time pH of the anodized solution and the pretreatment of the...

    Contact Now

  • Turning Aluminium Alloy Tube

    Turning Aluminium Alloy Tube

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-169

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Turning Aluminium Alloy Tube All aluminum parts with the surface of the rotary body can be processed by the method of turning aluminium alloy on the lathe In addition the lathe can also make a spring CNC turning aluminium alloy uses the machining method of high precision and high efficiency automatic machine tools to...

    Contact Now

  • Machining Turning Black Delrin Parts for Centrifuge

    Machining Turning Black Delrin Parts for Centrifuge

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-080

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machining Turning Black Delrin Parts for Centrifuge This is a machined delrin parts for centrifuge Machined Delrin parts for centrifuge has small friction coefficient good wear resistance good dimensional stability good surface gloss high viscoelasticity excellent electrical insulation and no influence on temperature...

    Contact Now

Review

M S Patil

Jan 30, 2020 5

Excellent quality! I got it very quickly in less than 13 days. Nice for the price, it is excellent.
Jesus Hector Maquez Ramirez

Jan 25, 2020 5

This is a good buy, I received today and I love the Aluminium Black Anodized .
Zenzile James

Jan 06, 2020 5

When I give this Aluminium Black Anodized the highest rating, please understand that this is relative to its peers, I am very happy to get this Aluminium Black Anodized .
Adhering to your principle of "quality, assistance, performance and growth", we have now gained trusts and praises from domestic and international customer for Aluminium Black Anodized , Aluminum Clear Anodized , Aluminum Clear Anodized Finish , "Good quality Good service " is always our tenet and credo. We take every effort to control the quality package labels etc and our QC will check every detail during producing and before shipment. We are willing to establish long business relationship with those who seek the high quality products and good service. We have set up a wide sales network across European countries North of America South of America Middle East Africa East Asia countries.Please contact us now you will find our professional experience and high quality grades will contribute to your business.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List