Communicate with Supplier? Supplier
Sun Mr. Sun
What can I do for you?
Chat Now Contact Supplier

Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD

Anodising On Aluminium - manufacturer, factory, supplier from China

(Total 24 Products for Anodising On Aluminium)

  • Hard Anodising of Aluminium

    Hard Anodising of Aluminium

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-079

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Hard anodising of aluminium refers to the process that aluminum and aluminum alloys in the corresponding electrolyte and under specific process conditions under the action of applied electric current to form an oxide film on aluminum and its alloy anode Hard anodising of aluminium oxide film changes its surface state...

    Contact Now

  • CNC Milling Machining Small Aluminium Spare Parts

    CNC Milling Machining Small Aluminium Spare Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-083

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Small Aluminium Spare Parts Aluminum alloy has good mechanical properties small density good conductivity and thermal conductivity so aluminium spare parts are widely used in industry The strength and hardness of aluminum alloy are low and the cutting load is small Due to the good thermal...

    Contact Now

  • Surface Treatment for Aluminium CNC Parts

    Surface Treatment for Aluminium CNC Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-215

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Surface Treatment for Aluminium CNC Parts There are many different forms of small aluminium parts surface treatment such as sandblasting to form a matte pearl silver surface polishing to form a mirror surface embossing pressing out various textures plating covering other metals spraying covering other non metallic...

    Contact Now

  • CNC Milling Machining Copper Components

    CNC Milling Machining Copper Components

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-059

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Copper Components The milling cutter used for milling machining copper is mainly made of high speed steel and K type hard alloy When milling machining copper and other materials with large plasticity low hardness large cutting deformation and easy to stick the cutting edge of the milling cutter...

    Contact Now

  • Turning Machining Brass Components on A Lathe

    Turning Machining Brass Components on A Lathe

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-058

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    Turning Machining Brass Components on A Lathe Methods to improve the surface quality of brass turning components processed by automatic lathe 1 Reduce the height of residual area In turning machining brass fittings the height of the residual area can be reduced by reducing the main deflection angle the secondary...

    Contact Now

  • Machining Aluminum Parts with Diamond Knurling Pattern

    Machining Aluminum Parts with Diamond Knurling Pattern

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-178

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Machining Aluminum Parts with Diamond Knurling Pattern The force of machining diamond knurling pattern on aluminum parts on a lathe is quite large and the workpiece must be firmly clamped When installing the knurling knives the cutter face should be perpendicular to the workpiece and the center of the flower wheel...

    Contact Now

  • Precision Machining Custom Aluminum Parts and Accessories

    Precision Machining Custom Aluminum Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-211

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision Machining Custom Aluminum Parts and Accessories Precision aluminum parts and accessories machining is to complete the machining of the main surface requirements according to the machining steps and procedures including the parallelism surface finish surface perpendicularity surface hardness etc so as to make...

    Contact Now

  • Machining Custom Nylon Parts on A Lathe

    Machining Custom Nylon Parts on A Lathe

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-097

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machining Custom Nylon Parts on A Lathe Because custom nylon parts has non toxic light weight excellent mechanical strength wear resistance and good corrosion resistance custom nylon parts is widely used to replace copper and other metals in the manufacturing of bearings gears pump blades and other parts in machinery...

    Contact Now

  • Custom Machining Metal with Straight Knurling on Lathe

    Custom Machining Metal with Straight Knurling on Lathe

    • Min. Order: 1 Bag/Bags

    • Model No.: TU-066

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Custom Machining Metal with Straight Knurling on Lathe Straight line knurling is a mechanical process of rolling patterns on the pinch of metal products or other working surfaces mainly for anti skid purposes In the process of metal custom machining we encounter this kind of straight line knurling products The process...

    Contact Now

  • Turning Machining Brass Inserts with Diamond Knurling

    Turning Machining Brass Inserts with Diamond Knurling

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-057

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    Turning Machining Brass Inserts with Diamond Knurling This is a brass turning insert made by lathe In order to increase friction one end of the brass turning insert is processed by diamond knurling Brass has good machining performance and is often used to machining into various accessories Turning brass on a lathe is...

    Contact Now

  • Precision CNC Milling Small Aluminum Parts

    Precision CNC Milling Small Aluminum Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-207

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision CNC Milling Small Aluminum Parts This is a small CNC milling parts high precision requirements which can not be achieved by laser cutting so we use CNC precision metal milling to process this small CNC milling parts Because this aluminum CNC milling parts are very small and the quantity is large the machine...

    Contact Now

  • High Precision Lathe Turning Plastic Parts with Grooves

    High Precision Lathe Turning Plastic Parts with Grooves

    • Min. Order: 1 Bag/Bags

    • Model No.: TU-065

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    High Precision Lathe Turning Plastic Parts with Grooves Lathe turning grooves machining is divided into internal groove and external groove The groove on this plastic turned parts belongs to external groove 1 For rectangular grooves with low turning accuracy and narrow width the slot cutter with the width equal to the...

    Contact Now

  • High Precision CNC Machining Opaque Acrylic Parts

    High Precision CNC Machining Opaque Acrylic Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-095

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Precision CNC Machining Opaque Acrylic Parts Acrylic machined parts has the advantages of light weight low price easy moulding and excellent weather resistance In addition the toughness of acrylic machined parts is higher even if it falls to the ground the acrylic machined parts is not easy to break CNC machining...

    Contact Now

  • Diamond Knurling Aluminum Parts and Accessories Machining

    Diamond Knurling Aluminum Parts and Accessories Machining

    • Min. Order: 1 Bag/Bags

    • Model No.: TU-064

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Custom Aluminum CNC Turning Parts with Righ angle When designing cam for knurling on CNC lathe it is required that after the knife touches the surface of CNC knurling parts and accessories it should cut directly into the prescribed pattern bottom diameter and then withdraw the knife immediately after staying at about...

    Contact Now

  • Custom Machining Stainless Steel Industrial Parts On Lathe

    Custom Machining Stainless Steel Industrial Parts On Lathe

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-053

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom Machining Stainless Steel Industrial Parts On Lathe Machining stainless steel on lathe is a process in which stainless steel is machined by lathe according to drawings The machinability of stainless steel industrial parts is much worse than that of medium carbon steel If the machinability of common 45 steel is...

    Contact Now

  • Precision CNC Machining Plastic Medical Parts

    Precision CNC Machining Plastic Medical Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-093

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision CNC Machining Plastic Medical Parts As a very important material plastics have been widely used in the field of medical and health care In the process of medical CNC machining of plastic medical parts it is not only the performance of medical plastics material that determines the quality and level of medical...

    Contact Now

  • High Precision CNC Milling Custom Aluminium Products

    High Precision CNC Milling Custom Aluminium Products

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-204

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Precision CNC Milling Custom Aluminium Products This is a customized heating module for round bottom flasks processed according to customer requirements This custom aluminium products chooses non sand hole aluminium block with good thermal conductivity for high precision CNC milling aluminium alloy so this custom...

    Contact Now

  • Turning Custom Steel Parts On A Lathe

    Turning Custom Steel Parts On A Lathe

    • Min. Order: 1 Bag/Bags

    • Model No.: MS-023

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Turning Custom Steel Parts On A Lathe This is a custom machined steel parts the material is 45 steel 45 steel is a kind of high quality carbon structural steel with high cost performance so it is widely used Custom machined steel parts with high strength requirements such as crankshaft shaft piston pin fixture and...

    Contact Now

  • CNC Precision Custom H85 Brass Parts Machining

    CNC Precision Custom H85 Brass Parts Machining

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-056

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    CNC Precision Custom H85 Brass Parts Machining This is a customized precision brass machining parts using CNC precision custom brass parts machining method and H85 material This customized precision brass machining parts has the advantages of corrosion resistance high temperature resistance high pressure resistance...

    Contact Now

  • High Speed CNC Milling Aluminium Alloy

    High Speed CNC Milling Aluminium Alloy

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-074

    • Productivity: 4600/Month

    High Speed CNC Milling Aluminium Alloy Milling aluminium alloy generally uses three edge aluminium milling cutters followed by two edge ball nose cutters or four edge flat bottom cutters due to different machining conditions High speed milling aluminium and large feed milling aluminium alloy is generally available for...

    Contact Now

  • High Speed CNC Milling Aluminium Blcok

    High Speed CNC Milling Aluminium Blcok

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-073

    • Productivity: 4600/Month

    High Speed CNC Milling Aluminium Blcok This product is machined by high speed CNC milling machining method Because this product needs large quantity and has high precision and quality requirements we adopt the method of casting aluminum blocks close to the shape of the product and then do aluminum block milling which...

    Contact Now

  • Precision Auto Turning Machining 303 Stainless Steel

    Precision Auto Turning Machining 303 Stainless Steel

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-051

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision Auto Turning Machining 303 Stainless Steel This is a stainless steel precision auto turned parts components machined by automatic lathe Stainless steel parts is more and more used in electric power aviation aerospace petroleum and food industry because of its special properties Although turning 303 stainless...

    Contact Now

  • High Speed Machining 6061 Aluminium Parts

    High Speed Machining 6061 Aluminium Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-201

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Speed Machining 6061 Aluminium Parts Aluminium alloy material is soft so in high speed machining aluminium cutting force should not be too large otherwise deformation will occur on the CNC machined aluminium parts When clamping stress should be avoided as far as possible Otherwise the tolerance of size and...

    Contact Now

  • Precision CNC Fabrication Aluminium Clamp Parts

    Precision CNC Fabrication Aluminium Clamp Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-200

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision CNC Fabrication Aluminium Clamp Parts This is an aluminium clamp made of 6061 aluminium material As can be seen from the following machining videos our engineer designed four aluminium fabrication parts with a rectangular piece of aluminium block In the process of CNC cutting aluminium two pieces of...

    Contact Now

Review

Hector Zakarias

Dec 26, 2019 5

Wow~~the Anodising On Aluminium is wonderful. Good price, good manufacturers.
Mr.byeongjun Park

Dec 18, 2019 5

The Anodising On Aluminium price is reasonable.
Maria Catherine Basilio

Dec 18, 2019 5

It is a great value, especially for the price.Highly recommend Anodising On Aluminium !
  • Related Information
Our solutions are widely identified and trusted by people and might fulfill continuously transforming economic and social demands for Anodising On Aluminium , Anodising on Aluminium , Anodizing Of Aluminium , For further inquires be sure to do not wait to make contact with us. Thank you - Your help continuously inspires us.
No matter new customer or old customer, We believe in long term and trusted relationship for Anodising On Aluminium , Anodising on Aluminium , Anodizing Of Aluminium , Our company follows laws and international practice. We promise to be responsible for friends customers and all partners. We would like to establish a long-term relationship and friendship with every customer from all over the world on the basis of mutual benefits. We warmly welcome all old and new customers to visit our company to negotiate business.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List