Communicate with Supplier? Supplier
Sun Mr. Sun
What can I do for you?
Chat Now Contact Supplier

Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD

Copper 110 Speeds And Feeds - manufacturer, factory, supplier from China

(Total 24 Products for Copper 110 Speeds And Feeds)

  • CNC Milling Machining Copper Components

    CNC Milling Machining Copper Components

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-059

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Copper Components The milling cutter used for milling machining copper is mainly made of high speed steel and K type hard alloy When milling machining copper and other materials with large plasticity low hardness large cutting deformation and easy to stick the cutting edge of the milling cutter...

    Contact Now

  • CNC Milling Machining Aluminum Parts for Wireless Handle

    CNC Milling Machining Aluminum Parts for Wireless Handle

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-213

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Wireless Handle In milling aluminium alloys the side edge machining requires a high degree of finish which can be solved by using a reasonable cutting speed The main reason for the poor finish of milling aluminium alloys is that the cutting speed is not selected properly...

    Contact Now

  • Turning Machining Ultem Parts and Accessories

    Turning Machining Ultem Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-100

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Turning Machining Ultem Parts and Accessories Ultem parts and accessories applications has good flame retardant low smoke rate and excellent chemical resistance Ultem parts and accessories applications are crack resistant in methyl ethyl ketone toluene and trichloroethylene Machining ultem rod is similar to other...

    Contact Now

  • Milling Machining Stainless Steel Parts and Accessories

    Milling Machining Stainless Steel Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-062

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Milling Machining Stainless Steel Parts and Accessories Burr often occurs in 4 axis milling stainless steel parts and accessories which may be due to the material of stainless steel itself or the cutting tool is not sharp enough or the milling parameters are not set properly Burr not only reduces the accuracy and...

    Contact Now

  • Precision Machining Custom Aluminum Parts and Accessories

    Precision Machining Custom Aluminum Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-211

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision Machining Custom Aluminum Parts and Accessories Precision aluminum parts and accessories machining is to complete the machining of the main surface requirements according to the machining steps and procedures including the parallelism surface finish surface perpendicularity surface hardness etc so as to make...

    Contact Now

  • CNC Machining Complex Aluminum Parts and Accessories

    CNC Machining Complex Aluminum Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-209

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machining Complex Aluminum Parts and Accessories The blank of complex custom aluminum parts and accessories is bar pipe or thick plate Most of the surplus is removed after machining complex components and only 1 10 to 1 20 of the original weight is retained finally The material removal is large the original fiber...

    Contact Now

  • Custom Lathe Turning Stainless Steel Parts and Accessories

    Custom Lathe Turning Stainless Steel Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-055

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom Lathe Turning Stainless Steel Parts and Accessories When lathe turning stainless steel first of all we should ensure that the lathe is stable that is the lathe is fixed well The second is whether there will be jitter when the spindle runs at high speed lathe turning stainless steel The third is that the coolant...

    Contact Now

  • Diamond Knurling Aluminum Parts and Accessories Machining

    Diamond Knurling Aluminum Parts and Accessories Machining

    • Min. Order: 1 Bag/Bags

    • Model No.: TU-064

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Custom Aluminum CNC Turning Parts with Righ angle When designing cam for knurling on CNC lathe it is required that after the knife touches the surface of CNC knurling parts and accessories it should cut directly into the prescribed pattern bottom diameter and then withdraw the knife immediately after staying at about...

    Contact Now

  • Milling Machining Aluminum Parts And Accessories

    Milling Machining Aluminum Parts And Accessories

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-077

    • Productivity: 4600/Month

    Advantages of CNC Machining Aluminum Products Technology In recent years in the process of metal milling machining the machined aluminum parts and accessories are gradually increasing and the shape is becoming more and more complex and the requirements of dimensional accuracy and roughness are getting higher and...

    Contact Now

  • Custom CNC Machining and Milling Plate Services

    Custom CNC Machining and Milling Plate Services

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-078

    • Productivity: 4600/Month

    Advantages of CNC Machining Aluminum Products Technology In the actual production of CNC machining and milling including machine tool setting workpiece clamping tool selection and other application skills this paper briefly summarizes 17 points of CNC machining and milling 1 Power capacity Check the power capacity and...

    Contact Now

  • CNC Milling Aluminum Boat Parts And Accessories

    CNC Milling Aluminum Boat Parts And Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-205

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Aluminum Boat Parts And Accessories Aluminum boat parts and accessories surface is not easily corroded because of aluminum material have dense oxide protective film Aluminum material is often used to manufacture chemical reactors medical devices refrigeration devices oil and natural gas pipelines etc...

    Contact Now

  • CNC Turning Machining Aluminum Parts and Accessories

    CNC Turning Machining Aluminum Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-203

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Turning Machining Aluminum Parts and Accessories For this simple aluminum parts and accessories we adopt CNC aluminum turning machining method automatic feed processing material 6061 aluminum rod the surface is clear anodized aluminum finish after sandblasting CNC aluminum turning machining is a method of turning...

    Contact Now

  • CNC Machined Plastic Parts and Accessoried Prototype

    CNC Machined Plastic Parts and Accessoried Prototype

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-092

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machined Plastic Parts and Accessoried Prototype To CNC plastic material end milling cutter should be used In CNC plastic material cutting edge should be sharp water cooled spindle speed should be fast machining center speed is 3000 5000 cutting amount roughing machining 1 5MM per cutter finishing machining use...

    Contact Now

  • Precision Copper Machined Parts

    Precision Copper Machined Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-006

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machining copper include sheet bar Copper has the following kinds C10100 C10200 C11000 and C12200 The copper content of copper is 99 3 or more and is essentially non alloyed copper Copper machined parts has excellent electrical conductivity and thermal conductivity and often used in a variety of conductive equipment...

    Contact Now

  • CNC Machining Complex Brass Parts and Accessories

    CNC Machining Complex Brass Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-052

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    CNC Machining Complex Brass Parts and Accessories These machined brass parts and accessories used the method of turn milling machining The machined brass parts and accessories can complete most of the turning surface and non turning surface machining in a single clamping and the position accuracy of the machined brass...

    Contact Now

  • Machining Beryllium Copper Battery Contacts

    Machining Beryllium Copper Battery Contacts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-050

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    Machining Beryllium Copper Battery Contacts The material of machining beryllium copper battery contacts is the best high performance elastic material in copper alloy Beryllium copper battery contacts has a series of excellent physical chemical and mechanical properties such as high strength elasticity hardness fatigue...

    Contact Now

  • CNC Precision Machining and Turning Aluminum Parts

    CNC Precision Machining and Turning Aluminum Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: TU-054

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Precision Machining and Turning Aluminum Parts In the CNC precision turning components process production conditions environmental temperature machine tool selection tool selection and workpiece material selection will all affect the quality performance and service life of the turned aluminum parts Therefore in...

    Contact Now

  • Custom Milling and Machining Products

    Custom Milling and Machining Products

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-045

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Custom Milling and Machining Products This is a custom milling and machining products We are professional manufacturer of custom milling and machining products And the MOQ is 1 piece so please feel free to contact us if you need custom milling and machining services We provide custom milling and machining services 1...

    Contact Now

  • High Speed Machining Copper Fixed Plate

    High Speed Machining Copper Fixed Plate

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-042

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    High Speed Machining Copper Fixed Plate This is a machined copper fixed plate which is used to fix the light source circuit of a flashlight This machined copper fixed plate is using copper material because it is also need to have conductive function When machining copper fixed plate the stretch length of the cutter...

    Contact Now

  • Free Machining Copper Custom Parts Samples

    Free Machining Copper Custom Parts Samples

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-041

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    Free Machining Copper Custom Parts Samples Copper material has its own characteristics not only soft but also sticky so in machining copper custom parts should pay attention to the use of sharp tools Because the chip breaking characteristics of copper materials are not good it is easy to form relatively long chips...

    Contact Now

  • Machining Copper Tube Services

    Machining Copper Tube Services

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-040

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    Machining Copper Tube Services The yield strength of copper is very high but the elongation is low In order to increase or reduce the hardness of the copper material at machining copper tube the copper hardness will be changed by heat treatment of copper In machining copper tube because of the high plasticity and...

    Contact Now

  • Precision Machining and Manufacturing Aluminum Parts

    Precision Machining and Manufacturing Aluminum Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-152

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision Machining and Manufacturing Aluminum Parts for PCB Holder This is machining aluminum products for PCB holder Aluminum precision products has good plasticity easy to plasticity machining so people often use precision machining and manufacturing products for daily life or mechanical machining in the industry...

    Contact Now

  • Custom Machining and Fabrication Aluminum Parts

    Custom Machining and Fabrication Aluminum Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-148

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom Machining and Fabrication Aluminum Parts We are committed to the custom machining and fabrication providing medical parts machining communication parts machining optical parts machining auto parts machining custom machining and fabrication complex parts CNC machining non standard parts machining customized CNC...

    Contact Now

  • High Speed Machining of Pure Copper Pipe

    High Speed Machining of Pure Copper Pipe

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-038

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    High Speed Machining of Pure Copper Pipe Pure copper is the earliest metal used in human history and it is also one of the most widely used metal materials Machining pure copper mainly used in conductive thermal conductivity and corrosion resistance of the equipment and machining pure copper is very important in...

    Contact Now

Review

Mary Landis

Jan 30, 2020 4

I did a lot of research before buying this Copper 110 Speeds And Feeds , until now, I'm still satisfied with this brand.
Roger Jiang

Jan 29, 2020 5

This is a really great Copper 110 Speeds And Feeds . Shipment to the US was incredibly fast .
Robert Kahle

Jan 19, 2020 5

Excellent. I recommend. I am very satisfied with the Copper 110 Speeds And Feeds .
  • Related Information
It is a great way to further improve our products and repair. Our mission is always to create innovative products to prospects with a superior expertise for Copper 110 Speeds And Feeds , copper 110 speeds and feeds , turning copper speeds and feeds , We've been devoted to provide experienced purification technology and options for yourself!
"Our group through specialist training. Skilled expert knowledge, sturdy sense of assistance, to fulfill the provider needs of shoppers for Copper 110 Speeds And Feeds , copper 110 speeds and feeds , turning copper speeds and feeds , We are confident that we're able to offer you with opportunities and might be a valuable business partner of you. We look forward to working with you soon. Learn more about the types of goods that we work with or contact us now directly with your inquiries. You are welcome to contact us anytime!

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List