Communicate with Supplier? Supplier
Sun Mr. Sun
What can I do for you?
Chat Now Contact Supplier

Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD

Custom Cnc Turning - manufacturer, factory, supplier from China

(Total 24 Products for Custom Cnc Turning)

  • High Precision CNC Machining Parts

    High Precision CNC Machining Parts

    • Model No.: CM-003

    • Productivity: 5600/Month

    • Transportation: Ocean,Land,Air

    High precision CNC machining of the workpiece in the process of roughing and finishing two different processes Stainless steel processing is very easy to deformation in order to eliminate product stress and deformation roughing and finishing CNC machining to have a time difference Mechanical processing of stainless...

    Contact Now

  • CNC machined plastic parts

    CNC machined plastic parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-014

    • Productivity: 52000/Month

    • Transportation: Ocean,Land,Air

    We have a wealth of CNC machined plastic technology We Machining for Plastic these include POM PA PC Teflon transparent PMMA CNC machined Plastic is widely used as an insulating material and its density is small to meet a lot of light weight of the equipment We offer industry leading custom CNC turning and milling Our...

    Contact Now

  • CNC Machining for Drone Parts

    CNC Machining for Drone Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-015

    • Productivity: 220000/Month

    • Transportation: Ocean,Land,Air

    CNC Machining for Drone Parts For CNC Machining Parts for Drone we set up a team of sales engineering quality and operations workers Machining for Drone Part has become a new starting point for the factory We now offer precision machined parts for DJI We offer industry leading custom CNC turning and milling Our...

    Contact Now

  • CNC Milling for Drone parts

    CNC Milling for Drone parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-016

    • Productivity: 26000/Month

    • Transportation: Ocean,Land,Air

    Our quality is more secure providing 100 of the size of the test for CNC milling machining more often will design a reasonable detection fixture to ensure higher quality and higher speed of the size of the test From the procurement of raw materials to CNC machining parts shipments we have established a complete set of...

    Contact Now

  • CNC machining parts for UAV

    CNC machining parts for UAV

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-017

    • Productivity: 26000/Month

    • Transportation: Ocean,Land,Air

    For CNC Machining Parts for UAV we set up a team of sales engineering quality and operations workers Machining for UAV Part has become a new starting point for the factory We now offer precision machined parts for DJI We offer industry leading custom CNC turning and milling Our precision parts serve medical...

    Contact Now

  • Custom CNC Turning Aluminum Parts

    Custom CNC Turning Aluminum Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: TU-002

    • Productivity: 26000/Month

    • Transportation: Ocean,Land,Air

    This is custom CNC turning aluminum parts material Aluminum 7075 Our engineers have developed a fixture for this custom CNC turning parts to improve the quality and efficiency of our products It is important to note that custom CNC aluminum parts are subject to slight variations in size at the anode These are included...

    Contact Now

  • High Precision CNC turned of drone parts

    High Precision CNC turned of drone parts

    • Min. Order: 1 Bag/Bags

    • Model No.: TU-008

    • Productivity: 260000/Month

    • Transportation: Ocean,Land,Air

    This is a High Precision CNC turned parts Used in DJI drone Up to now we have provided tens of thousands of CNC turned parts We have a professional for the drone technology and production team Provide high precision CNC turned parts Accuracy can reach 0 005mm We provide precision CNC Turned Parts for DJI HUAWEI...

    Contact Now

  • turning stainless steel for robots parts

    turning stainless steel for robots parts

    • Min. Order: 1 Bag/Bags

    • Model No.: TU-009

    • Productivity: 260000/Month

    • Transportation: Ocean,Land,Air

    For stainless steel turning our technicians control the quality of products from the following aspects choosing cemented carbide cutters using YW alloy cutters using slow speed for rough machining large cutting volume high speed for finish machining and small cutting volume Using high pressure jet cutting fluid to...

    Contact Now

  • Precision turning machine process services

    Precision turning machine process services

    • Min. Order: 1 Bag/Bags

    • Model No.: TU-018

    • Productivity: 13000/Month

    • Transportation: Ocean,Land,Air

    We have more than 2 600 square meters building workshop Has 12 years of experience in CNC milling machining and cnc turning a dedicated technical team on the machining and cnc milling These are 8 with more than 10 years of work experience in programming 12 more than 8 years of skilled workers Has passed ISO9001 2008...

    Contact Now

  • Machining 6061 and 7075 Aluminum

    Machining 6061 and 7075 Aluminum

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-007

    • Productivity: 130000/Month

    • Transportation: Ocean,Land,Air

    Machining 6061 and 7075 Aluminum Major brands of aluminum alloy are 1024 2011 6060 6063 6061 6082 1 series aluminum aluminum content of not less than 99 00 2 Series the main alloying elements of aluminum alloy 6 Series Magnesium as the main alloying elements and to strengthen the phase Mg2Si phase of the aluminum...

    Contact Now

  • Precision CNC turning aluminum

    Precision CNC turning aluminum

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-008

    • Productivity: 26000/Month

    • Transportation: Ocean,Land,Air

    High precision turning aluminum parts Divided into rough turning and finishing turning two processes 1 rough machining it is necessary to choose high strength durability good tool slow speed large cutting capacity efficient product contours 2 finishing machining to choose high precision durability good tool high speed...

    Contact Now

  • Turning Aluminum Parts for Industrical Automation

    Turning Aluminum Parts for Industrical Automation

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-009

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Turning Aluminum Parts for Industrical Automation Turning aluminum parts has four basic points 1 reasonable choice of cutting 2 reasonable choice of tools 3 reasonable choice of fixtures 4 reasonable machining routes Our CNC Turning Center is equipped with a multi station turret or power turret The machine has a wide...

    Contact Now

  • CNC machining metal parts

    CNC machining metal parts

    • Min. Order: 1 Bag/Bags

    • Model No.: MS-004

    • Productivity: 26000/Month

    • Transportation: Ocean,Land,Air

    Most of the machining metal parts should be heat treated to increase the hardness of the workpiece we have specialized heat treatment suppliers to provide products of the second service We have more than 2 600 square meters building workshop Has 12 years of experience in CNC milling machining and cnc turning a...

    Contact Now

  • CNC machining metal part

    CNC machining metal part

    • Min. Order: 1 Bag/Bags

    • Model No.: MS-005

    • Productivity: 10400/Month

    • Transportation: Ocean,Land,Air

    CNC machining metal parts is widely used after heat treatment to get a good combination of strength and toughness with the comprehensive mechanical properties you can make gears connecting rods bearings Our CNC machining steel is divided into four categories Ordinary carbon structural Q195 Q215 Q235 Quality carbon...

    Contact Now

  • Precision Copper Machined Parts

    Precision Copper Machined Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-006

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machining copper include sheet bar Copper has the following kinds C10100 C10200 C11000 and C12200 The copper content of copper is 99 3 or more and is essentially non alloyed copper Copper machined parts has excellent electrical conductivity and thermal conductivity and often used in a variety of conductive equipment...

    Contact Now

  • Machining turning bronze parts

    Machining turning bronze parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-007

    • Productivity: 78000/Month

    • Transportation: Ocean,Land,Air

    Our CNC machining bronze has the following models C220 C510 C630 C863 C936 Bronze consists of a variety of alloys Cu Zn Sn Mn Al Has a high corrosion resistance and wear resistance Machining bronze parts In the sea water salt water immersion has a very good tolerance CNC machining bronze parts Used in the ship...

    Contact Now

  • CNC milling machining brass parts

    CNC milling machining brass parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-008

    • Productivity: 1560/Month

    • Transportation: Ocean,Land,Air

    This is a cnc brass parts for use in wind power settings As we all know brass machined parts of the strength and wear resistance is extremely high In order to increase the conductivity of the product and wear life we have a V shaped groove in the brass parts We offer industry leading custom CNC turning and milling Our...

    Contact Now

  • Machining Aluminum Parts 6061-T6

    Machining Aluminum Parts 6061-T6

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-012

    • Productivity: 2600/Month

    • Transportation: Ocean,Land,Air

    Machining Aluminum Parts 6061 T6 applications in various industries Aluminum 6061 T6 is a high quality aluminum alloy product aluminum 6061 T6 is better than 6061 hardness corrosion resistance and anodic treatment this can be seen in the aluminum CNC machining process CNC machining including CNC milling and CNC...

    Contact Now

  • CNC Machining Aluminum Parts 7075

    CNC Machining Aluminum Parts 7075

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-013

    • Productivity: 2600/Month

    • Transportation: Ocean,Land,Air

    This is a high quality CNC Machining Aluminum Parts In the process of machining aluminum 7075 we found that aluminum 7075 hardness higher than aluminum 6061 Aluminum 7075 Aluminum alloy with Al and Zn as the main alloying element Applications aircraft load bearing parts propeller aerospace equipment aluminum mold CNC...

    Contact Now

  • Machining  Aluminum parts for drone

    Machining Aluminum parts for drone

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-014

    • Productivity: 78000/Month

    • Transportation: Ocean,Land,Air

    We offer high precision machining aluminum parts for drone As we all know aluminum alloy density is low high hardness CNC machining aluminum parts are widely used in drones We offer machining service to DJI We offer industry leading custom CNC turning and milling Our precision parts serve medical communications...

    Contact Now

  • Machining  Aluminum parts for UAV

    Machining Aluminum parts for UAV

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-015

    • Productivity: 78000/Month

    • Transportation: Ocean,Land,Air

    Our factory provides tens of thousands of machining UAV aluminum parts for UAV manufacturers such as DJI machining aluminum surface treatment anode clear black blue yellow can also customize a variety of colors Sandblasting spraying Our factory provides tens of thousands of machining UAV aluminum parts for UAV...

    Contact Now

  • CNC machining aluminum parts with Anodize

    CNC machining aluminum parts with Anodize

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-016

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    How to ensure the accuracy of the aluminum parts after processing the anodized Most of the machined aluminum parts need to be made of anodes and have different colors such as black red blue Our engineers found that the aluminum parts anodize would have a size effect of 0 003 to 0 013mm on the size This will seriously...

    Contact Now

  • Color Anodize aluminum parts for machining

    Color Anodize aluminum parts for machining

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-017

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    We offer aluminum parts for machining which can be anodized in a variety of colors including Black yellow blue transparent other custom colors please provide color samples or color numbers Anodized aluminum parts of the machined product size tolerance 0 01mm And provide secondary processing services polishing welding...

    Contact Now

  • CNC machining copper parts

    CNC machining copper parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-009

    • Productivity: 5600/Month

    • Transportation: Ocean,Land,Air

    This is a process for over 800A current machining copper parts should be used in large scale welding machine accessories Copper machined parts have excellent electrical properties excellent corrosion resistance and ease of processing as well as good strength and fatigue resistance Pure copper color is red called red...

    Contact Now

Review

Narayana Rao

Jan 26, 2020 5

A good Custom Cnc Turning . perfectly packaged. fast delivery.
Sj Michael

Jan 23, 2020 5

I was quite surprised how high quality this Custom Cnc Turning was for the price. Thanks manufacturer!
Greisy Hernandez

Jan 18, 2020 4

This Custom Cnc Turning works great for us!
  • Related Information
Our goal is usually to deliver high quality items at aggressive price ranges, and top-notch service to shoppers around the entire world. We're ISO9001, CE, and GS certified and strictly adhere to their high quality specifications for Custom Cnc Turning , Custom CNC Turning , Custom Aluminum Turning , We warmly welcome your participation based on mutual benefits in the near future.
"To continually enhance the management technique by virtue of your rule of ""sincerely, great faith and high-quality are the base of company development"", we widely absorb the essence of similar merchandise internationally, and continuously build new merchandise to meet the demands of customers for Custom Cnc Turning , Custom CNC Turning , Custom Aluminum Turning , We believe that good business relationships will lead to mutual benefits and improvement for both parties. We have established long-term and successful cooperative relationships with many customers through their confidence in our customized services and integrity in doing business. We also enjoy a high reputation through our good performance. Better performance will be expected as our principle of integrity. Devotion and Steadiness will remain as ever.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List