Communicate with Supplier? Supplier
Sun Mr. Sun
What can I do for you?
Chat Now Contact Supplier

Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD

Machined Delrin - manufacturer, factory, supplier from China

(Total 24 Products for Machined Delrin)

  • Machined Custom Delrin Parts

    Machined Custom Delrin Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-067

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machined Custom Delrin Parts Delrin is a smooth shiny hard and dense material pale yellow or white with a translucent thin part Custom Delrin parts which is cheaper than many other engineering plastic parts is replacing some of the metals traditionally occupied by markets such as zinc brass aluminum and steel since...

    Contact Now

  • Precision Engraving Machining Delrin Parts

    Precision Engraving Machining Delrin Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-079

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision Engraving Machining Delrin Parts This is a custom machined Delrin parts used CNC engraving machining process Compared with CNC machining Delrin CNC engraving machining Delrin has the advantages of high speed high machining efficiency high surface finish and high performance price ratio As the power of the...

    Contact Now

  • Machining Turning Black Delrin Parts for Centrifuge

    Machining Turning Black Delrin Parts for Centrifuge

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-080

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machining Turning Black Delrin Parts for Centrifuge This is a machined delrin parts for centrifuge Machined Delrin parts for centrifuge has small friction coefficient good wear resistance good dimensional stability good surface gloss high viscoelasticity excellent electrical insulation and no influence on temperature...

    Contact Now

  • Machined Ultem Parts with CNC Logo

    Machined Ultem Parts with CNC Logo

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-101

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machined Ultem Parts with CNC Logo Machined ultem parts and accessories are extremely suitable for electrical and electronic insulating parts including many semiconductor process components as well as a series of structural components These machined ultem parts and accessories require high strength and rigidity at...

    Contact Now

  • CNC Machined Plastic Parts and Accessoried Prototype

    CNC Machined Plastic Parts and Accessoried Prototype

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-092

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machined Plastic Parts and Accessoried Prototype To CNC plastic material end milling cutter should be used In CNC plastic material cutting edge should be sharp water cooled spindle speed should be fast machining center speed is 3000 5000 cutting amount roughing machining 1 5MM per cutter finishing machining use...

    Contact Now

  • CNC Machined Aluminum Telescope Parts With Purple Anodized

    CNC Machined Aluminum Telescope Parts With Purple Anodized

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-199

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machined Aluminum Telescope Parts With Purple Anodized The matters needing attention in the process of anodizing aluminum service are as follows 1 Reasonable control of anodic oxidation process conditions including solution temperature voltage and time 2 In the anodizing aluminum process attention should be paid...

    Contact Now

  • Precision CNC Machined Aluminium Parts For Telescope

    Precision CNC Machined Aluminium Parts For Telescope

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-070

    • Productivity: 4600/Month

    Precision CNC Machined Aluminium Parts For Telescope This is a handheld telescope structure bracket Red anodizing of aluminium is used as the surface treatment It can also have a very beautiful color after increasing the anti oxidation and anti friction performance of the surface The bracket needs a certain degree of...

    Contact Now

  • Precision Copper Machined Parts

    Precision Copper Machined Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-006

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machining copper include sheet bar Copper has the following kinds C10100 C10200 C11000 and C12200 The copper content of copper is 99 3 or more and is essentially non alloyed copper Copper machined parts has excellent electrical conductivity and thermal conductivity and often used in a variety of conductive equipment...

    Contact Now

  • Machined Aluminum Parts with Clear Anodized Finish

    Machined Aluminum Parts with Clear Anodized Finish

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-193

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machined Aluminum Parts with Clear Anodized Finish After clear anodized finish the surface of machined aluminum aircraft parts can get a layer of dense film from tens of micrometers to even hundreds of micrometers that is much thicker than natural oxide film This artificial oxide film is then subjected to a sealing...

    Contact Now

  • High Precision CNC Machined Components for UAV

    High Precision CNC Machined Components for UAV

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-062

    • Productivity: 4600/Month

    High Precision CNC Machined Components for UAV Machined components for UAV using aluminum alloy as raw material through advanced CNC machining equipment system accurate calculation customized CNC machined components for UAV can be accurate to 0 01mm Buildre Group has advanced CNC machining equipment which can produce...

    Contact Now

  • Custom Machined Teflon Products

    Custom Machined Teflon Products

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-086

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom Machined Teflon Products The mechanical properties of custom teflon products are good the tensile strength is 21 28MPa the flexural strength is 11 14MPa and the elongation is 250 300 The static and dynamic friction coefficients of custom teflon products with the steel are 0 04 and the friction coefficients are...

    Contact Now

  • CNC Machined Aluminum Flanges Parts for Ducting

    CNC Machined Aluminum Flanges Parts for Ducting

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-055

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Aluminum flanges parts is a connecting part between the pipe and the pipe used for the connection between the pipe end It is also used in the equipment on the import and export of the flange for the connection between the two devices such as the reducer flange Flange connection or flange joint means that the flange...

    Contact Now

  • Machined Turned Aluminum Inserts Parts

    Machined Turned Aluminum Inserts Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: TU-052

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Machined Turned Aluminum Inserts Parts A lathe is a kind of machine tool which is used for turning and machining The lathe is mainly used to process shafts discs sleeves and other workpiece with a revolving surface it is suitable for the rough machining semi finishing and finishing of the workpiece Turning and...

    Contact Now

  • Custom CNC Machined Billet Aluminum

    Custom CNC Machined Billet Aluminum

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-167

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Custom CNC Machined Billet Aluminum During the aluminum CNC fabrication process The surface of machined billet aluminum parts may have cracks or decline in material quality This condition to a certain extent affects the basis of measurement Most of this phenomenon is related to the material prestress and plastic...

    Contact Now

  • 3D CNC Machined Turned Aluminum Tube

    3D CNC Machined Turned Aluminum Tube

    • Min. Order: 1 Bag/Bags

    • Model No.: Al-166

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    3D CNC Machined Turned Aluminum Tube In machined turned aluminum there are many kinds of tool materials the tool materials used in general machine tools can also be used in CNC machine tools but tool materials must have high hardness high wear resistance sufficient strength and toughness high heat resistance and good...

    Contact Now

  • Best Machining Delrin Plastic for Flashlight Enclosure

    Best Machining Delrin Plastic for Flashlight Enclosure

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-075

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Best Machining Delrin Plastic for Flashlight Enclosure For our modern life rugged and portable Delrin machined parts for flashlight enclosure is very common in everyday use The choose of materials of plastic enclosure machining should be determined according to the type purpose and environment of the flashlight At...

    Contact Now

  • Custom Machining Black Delrin Rod

    Custom Machining Black Delrin Rod

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-076

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom Machining Black Delrin Rod Black Delrin rod is an ideal engineering plastic for nonferrous metals and alloy products such as copper aluminum zinc and so on Black Delrin rod has good physical mechanical and chemical properties especially excellent friction resistance Black Delrin rod is very suitable for...

    Contact Now

  • Milling Machining Delrin Fixed Plate Parts

    Milling Machining Delrin Fixed Plate Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-073

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Milling Machining Delrin Fixed Plate Parts This is a fixed plate for flashlight astigmatism The material of machining delrin fixed plate is a crystalline plastic with a density of 1 42g cm3 and has very good stiffness Machining delrin fixed plate s tensile strength bending strength fatigue resistance creep resistance...

    Contact Now

  • 5 Axis Machined Aluminum Parts

    5 Axis Machined Aluminum Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-132

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    5 Axis Machined Aluminum Parts Modern machining aluminum generally use ball end mill to machining ball end mill in machining aluminum in the benefits are very obvious but if the vertical machining center is used the bottom line speed is zero so that the bottom surface is very poor but if use 5 axis aluminum machining...

    Contact Now

  • Machined Turned Aluminum Boat Components

    Machined Turned Aluminum Boat Components

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-128

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machined Turned Aluminum Boat Components Aluminum boat components selected materials are more stringent and now more choice is 5083 5086 5454 5754 6061 and other aluminum products Aluminum boat components has the following criteria first it has high specific strength and specific modulus which will be beneficial to...

    Contact Now

  • Machining White Delrin Insulating Ring

    Machining White Delrin Insulating Ring

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-066

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machining White Delrin Insulating Ring In the process of machining white Delrin the workpiece will deform because of many factors In view of these deformation factors we adopted the following measures in machining white Delrin to prevent deformation 1 Make the rough more normative before rough machining then start...

    Contact Now

  • Turning Machining Blue Delrin Parts

    Turning Machining Blue Delrin Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-043

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Delrin is a kind of synthetic resin also known as polyoxymethylene resin POM plastic race steel is a kind of white or black plastic particles has the characteristics of high hardness high rigidity and high wear resistance The molecular structure is regular and crystalline making its physical and mechanical properties...

    Contact Now

  • Custom Machined 5052 Aluminum Enclosures

    Custom Machined 5052 Aluminum Enclosures

    • Model No.: AL-124

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    With the rapid development of industry in our country the demand of machined aluminum enclosure is more and more big Now many of the shell of electronic products mainly are machined aluminum enclosures aluminum products has become one of the mainstream products in the electronics industry Machined aluminum enclosure...

    Contact Now

  • Easily Machined Aluminum Automotive Fittings

    Easily Machined Aluminum Automotive Fittings

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-123

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Components of aluminum in the cost manufacturing technology mechanical performance sustainable development and other aspects of comprehensive performance is good so components of aluminum is now and in the future automotive industry s preferred light metal parts In the future components of aluminum will play a more...

    Contact Now

Review

Tomas Bergstrand

Jan 26, 2020 4

Fast shipping. Great Machined Delrin .
Tarek Alsaudy

Jan 10, 2020 5

This is my first time to buy Machined Delrin from Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD company!, the result of it seems nice.
Umar Draz Shahid

Jan 07, 2020 5

The price is a little high. I hope I can get a discount next time.
  • Related Information
We now have many fantastic staff members customers superior at advertising, QC, and working with varieties of troublesome problem within the generation system for Machined Delrin , machined delrin , Machined Delrin Parts , enterprise associations and friends from all components from the earth to make contact with us and find cooperation for mutual positive aspects.
We normally follow the basic principle "Quality Initial, Prestige Supreme". We've been fully committed to offering our consumers with competitively priced good quality merchandise, prompt delivery and professional support for Machined Delrin , machined delrin , Machined Delrin Parts , We care about every steps of our services from factory selection product development & design price negotiation inspection shipping to aftermarket. We've implemented a strict and complete quality control system which ensures that each product can meet quality requirements of customers. Besides all of our goods have been strictly inspected before shipment. Your Success Our Glory: Our aim is to help customers realize their goals. We've been making great efforts to achieve this win-win situation and sincerely welcome you to join us.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List