Communicate with Supplier? Supplier
Sun Mr. Sun
What can I do for you?
Chat Now Contact Supplier

Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD

Milling Brass - manufacturer, factory, supplier from China

(Total 24 Products for Milling Brass)

  • CNC milling machining brass parts

    CNC milling machining brass parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-008

    • Productivity: 1560/Month

    • Transportation: Ocean,Land,Air

    This is a cnc brass parts for use in wind power settings As we all know brass machined parts of the strength and wear resistance is extremely high In order to increase the conductivity of the product and wear life we have a V shaped groove in the brass parts We offer industry leading custom CNC turning and milling Our...

    Contact Now

  • Precision Milling Machining Brass Parts for Boats

    Precision Milling Machining Brass Parts for Boats

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-056

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Precision Milling Machining Brass Parts for Boats There are many points for attention in milling brass parts For example 1 The white steel knife should be used less in the rough milling machining brass parts and the flying knife or an alloy knife should be more used 2 In milling machining brass the speed of the white...

    Contact Now

  • Custom Milling Machining Brass Products

    Custom Milling Machining Brass Products

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-049

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    Custom Milling Machining Brass Products Because of the low hardness and good plasticity of custom machined brass parts the built up edges are often appears in custom milling machining brass products which makes the surface quality unable to meet the design and technological requirements In order to meet the design and...

    Contact Now

  • CNC Turning Machining Brass Agriculture Components

    CNC Turning Machining Brass Agriculture Components

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-051

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    CNC Turning Machining Brass Agriculture Components When CNC turning brass the commonly used tool materials are high speed steel tungsten cobalt type cemented carbide and so on For some special turning brass components carbon tool steel and alloy tool steel can also be used as forming tool materials using these...

    Contact Now

  • CNC Machining Complex Brass Parts and Accessories

    CNC Machining Complex Brass Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-052

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    CNC Machining Complex Brass Parts and Accessories These machined brass parts and accessories used the method of turn milling machining The machined brass parts and accessories can complete most of the turning surface and non turning surface machining in a single clamping and the position accuracy of the machined brass...

    Contact Now

  • High Efficiency Turning Milling Machining Brass Parts

    High Efficiency Turning Milling Machining Brass Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-053

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    High Efficiency Turning Milling Machining Brass Parts Turning milling is a kind of cutting techniques that combines motion of turning and milling together to complete rotary part s cutting machining It is the relative motion between cutter and work piece that the processing course of the machining center Nowadays...

    Contact Now

  • Custom CNC Turning Machining Brass Parts

    Custom CNC Turning Machining Brass Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-054

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    Custom CNC Turning Machining Brass Parts This is a custom turned brass parts made of H62 brass rod Turned brass parts have attracted great attention from engineering circles for their excellent electrical conductivity heat transfer and corrosion resistance New applications have been developed continuously Brass rods...

    Contact Now

  • Automatic CNC Turning Machining Custom Brass Screw Inserts

    Automatic CNC Turning Machining Custom Brass Screw Inserts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-055

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    Automatic CNC Turning Machining Custom Brass Screw Inserts This is a special customized brass screw with two flat positions at one end machined by our automatic CNC lathe Our automatic CNC lathe can produce all kinds of customized products at high speed and high quality according to the needs of customers Our CNC...

    Contact Now

  • CNC Precision Custom H85 Brass Parts Machining

    CNC Precision Custom H85 Brass Parts Machining

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-056

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    CNC Precision Custom H85 Brass Parts Machining This is a customized precision brass machining parts using CNC precision custom brass parts machining method and H85 material This customized precision brass machining parts has the advantages of corrosion resistance high temperature resistance high pressure resistance...

    Contact Now

  • Turning Machining Brass Inserts with Diamond Knurling

    Turning Machining Brass Inserts with Diamond Knurling

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-057

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    Turning Machining Brass Inserts with Diamond Knurling This is a brass turning insert made by lathe In order to increase friction one end of the brass turning insert is processed by diamond knurling Brass has good machining performance and is often used to machining into various accessories Turning brass on a lathe is...

    Contact Now

  • Turning Machining Brass Components on A Lathe

    Turning Machining Brass Components on A Lathe

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-058

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    Turning Machining Brass Components on A Lathe Methods to improve the surface quality of brass turning components processed by automatic lathe 1 Reduce the height of residual area In turning machining brass fittings the height of the residual area can be reduced by reducing the main deflection angle the secondary...

    Contact Now

  • High Speed CNC Milling Machining Stainless Steel Parts

    High Speed CNC Milling Machining Stainless Steel Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-063

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Speed CNC Milling Machining Stainless Steel Parts This C shaped stainless steel custom parts is a product logo produced by our company for our customers It adopts the machining method of CNC machining logo After the completion of high speed milling stainless steel the surface of stainless steel custom parts will...

    Contact Now

  • CNC Milling Machining Small Aluminium Spare Parts

    CNC Milling Machining Small Aluminium Spare Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-083

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Small Aluminium Spare Parts Aluminum alloy has good mechanical properties small density good conductivity and thermal conductivity so aluminium spare parts are widely used in industry The strength and hardness of aluminum alloy are low and the cutting load is small Due to the good thermal...

    Contact Now

  • 4 Axis CNC Milling Machining Custom Parts

    4 Axis CNC Milling Machining Custom Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-082

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    4 Axis CNC Milling Machining Custom Parts We use the 4 axis CNC milling machining method for this part Because there are many surfaces to be machined for this machined milled parts it will be more troublesome to use the ordinary 3 axis machining As this machined milled parts is an exterior part we have also finished...

    Contact Now

  • CNC Milling Machining Copper Components

    CNC Milling Machining Copper Components

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-059

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Copper Components The milling cutter used for milling machining copper is mainly made of high speed steel and K type hard alloy When milling machining copper and other materials with large plasticity low hardness large cutting deformation and easy to stick the cutting edge of the milling cutter...

    Contact Now

  • CNC Milling Machining Aluminum Parts for Wireless Handle

    CNC Milling Machining Aluminum Parts for Wireless Handle

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-213

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Wireless Handle In milling aluminium alloys the side edge machining requires a high degree of finish which can be solved by using a reasonable cutting speed The main reason for the poor finish of milling aluminium alloys is that the cutting speed is not selected properly...

    Contact Now

  • Easy Milling Machining Green Plastic Plate Material

    Easy Milling Machining Green Plastic Plate Material

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-099

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Easy Milling Machining Green Plastic Plate Material In milling plastic plate material CNC machining is needed when the precision of machined plastic components is high In milling plastic plate material when the feed rate of the worktable is large and the spindle speed of the milling machine is high the machined...

    Contact Now

  • Milling Machining Stainless Steel Parts and Accessories

    Milling Machining Stainless Steel Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-062

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Milling Machining Stainless Steel Parts and Accessories Burr often occurs in 4 axis milling stainless steel parts and accessories which may be due to the material of stainless steel itself or the cutting tool is not sharp enough or the milling parameters are not set properly Burr not only reduces the accuracy and...

    Contact Now

  • Quality CNC Milling Machining Aluminum Products

    Quality CNC Milling Machining Aluminum Products

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-081

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Laser Jig Quality CNC machining is a complex and comprehensive work Quality CNC machining requires many technologies and the advanced technology affects the quality and efficiency of machining The level of quality CNC machining is also directly related to the machining accuracy...

    Contact Now

  • CNC Milling Machining Simple Aluminum Parts Hardware

    CNC Milling Machining Simple Aluminum Parts Hardware

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-212

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Simple Aluminum Parts Hardware We machining this simple aluminum parts hardware with special fixture made by ourself The special fixture is specially designed according to the requirements of the machining procedure of CNC small aluminum parts The positioning elements on the fixture can make the...

    Contact Now

  • CNC Milling Machining Aluminum Parts for Laser Jig

    CNC Milling Machining Aluminum Parts for Laser Jig

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-051

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Laser Jig This is an aluminum parts for laser jig made by our factory CNC milling machining aluminum parts for laser jig is the process of using CNC machine tools to change the shape size relative position and nature of aluminum blank to machining it into aluminum laser jig...

    Contact Now

  • High Speed Milling Machining Stainless Steel Accessories

    High Speed Milling Machining Stainless Steel Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-057

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Speed Milling Machining Stainless Steel Accessories Stainless steel accessories parts is difficult to CNC machining which has the characteristics of high strength large cutting force large plasticity easy to work hardening small thermal conductivity and high machining temperature In the high speed machining...

    Contact Now

  • High Speed Machining Milling Aluminum Parts

    High Speed Machining Milling Aluminum Parts

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-080

    • Productivity: 4600/Month

    High Speed Machining Milling Aluminum Parts High speed machining milling aluminum allows a larger feed rate which is 5 to 10 times higher than that of conventional aluminum machining CNC milling The material removal rate per unit time can be increased by 3 to 6 times and the machining time can be greatly reduced High...

    Contact Now

  • Precision CNC Milling Small Aluminum Parts

    Precision CNC Milling Small Aluminum Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-207

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision CNC Milling Small Aluminum Parts This is a small CNC milling parts high precision requirements which can not be achieved by laser cutting so we use CNC precision metal milling to process this small CNC milling parts Because this aluminum CNC milling parts are very small and the quantity is large the machine...

    Contact Now

Review

Bienvenido Camacho

Dec 25, 2019 5

Good deal, highly recommended!
Mr.marcelo Goy

Dec 23, 2019 5

Excellence! It’s a perfect purchase for me.
Elke Leyser

Dec 20, 2019 4

A very kind seller^ - ^
  • Related Information
"Control the standard by the details, show the toughness by quality". Our firm has strived to establish a highly efficient and stable workers workforce and explored an effective high-quality management system for Milling Brass , CNC Milling Brass , milling brass , We feel we will become a leader in developing and producing good quality products and solutions in the two Chinese and international markets. We hope to cooperate with more pals for mutual advantages.
"It adheres for the tenet ""Honest, industrious, enterprising, innovative"" to create new products consistently. It regards buyers, success as its own success. Let us develop prosperous future hand in hand for Milling Brass , CNC Milling Brass , milling brass , As the world economic integration bringing challenges and opportunities to the xxx industry our company by carrying on our teamwork quality first innovation and mutual benefit are confident enough to provide our clients sincerely with qualified products competitive price and great service and to build a brighter future under the spirit of higher faster stronger with our friends together by carrying on our discipline.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List