Communicate with Supplier? Supplier
Sun Mr. Sun
What can I do for you?
Chat Now Contact Supplier

Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD

Milling Machining Of Brass - manufacturer, factory, supplier from China

(Total 24 Products for Milling Machining Of Brass)

  • Precision brass machined parts

    Precision brass machined parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU001

    • Productivity: 10400/Month

    • Transportation: Ocean,Land,Air

    Our technical team has very good experience in machining brass brass machined parts including brass plate brass rod brass tube The binary alloys of copper and zinc are often referred to as yellow copper Common models are C26000 C27000 C28000 C33000 High speed milling machining of brass can get excellent surface finish...

    Contact Now

  • High precision machining brass parts

    High precision machining brass parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-002

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Brass has a good CNC machining performance Because brass has excellent wear resistance so tool wear should be considered in the machining process High speed turning and milling machining brass can get a good finish We also provide secondary CNC machining services the surface finish of CNC brass parts can up to 0 8...

    Contact Now

  • Silver plated machining brass parts

    Silver plated machining brass parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-003

    • Productivity: 15600/Month

    • Transportation: Ocean,Land,Air

    This is a brass for machining on slip ring Surface silver plating increases conductivity Brass ring good conductivity and thermal conductivity and high hardness good wear resistance We will be brass machining parts used in the slip ring you can transmit 1000MHz signal We have three types of machining copper copper...

    Contact Now

  • Gold-plated brass machining parts

    Gold-plated brass machining parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-004

    • Productivity: 15600/Month

    • Transportation: Ocean,Land,Air

    This is a Gold plated brass machining parts In order to increase the over signal function of brass parts Brass machined parts surface polishing and then gold plated Can transmit the signal of 1000MHz We supply tens of thousands of machined brass pieces and are widely used in slip rings We have three types of machining...

    Contact Now

  • CNC machining turning brass parts

    CNC machining turning brass parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-005

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Brass has excellent cnc machining turning performance high speed machining turning under the brass can get excellent surface finish Brass is added in the copper 30 to 40 Zn element So brass is higher than the hardness of copper have better resistance to abrasion and corrosion resistance Machining turning brass parts...

    Contact Now

  • Precision Copper Machined Parts

    Precision Copper Machined Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-006

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machining copper include sheet bar Copper has the following kinds C10100 C10200 C11000 and C12200 The copper content of copper is 99 3 or more and is essentially non alloyed copper Copper machined parts has excellent electrical conductivity and thermal conductivity and often used in a variety of conductive equipment...

    Contact Now

  • Machining turning bronze parts

    Machining turning bronze parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-007

    • Productivity: 78000/Month

    • Transportation: Ocean,Land,Air

    Our CNC machining bronze has the following models C220 C510 C630 C863 C936 Bronze consists of a variety of alloys Cu Zn Sn Mn Al Has a high corrosion resistance and wear resistance Machining bronze parts In the sea water salt water immersion has a very good tolerance CNC machining bronze parts Used in the ship...

    Contact Now

  • CNC milling machining brass parts

    CNC milling machining brass parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-008

    • Productivity: 1560/Month

    • Transportation: Ocean,Land,Air

    This is a cnc brass parts for use in wind power settings As we all know brass machined parts of the strength and wear resistance is extremely high In order to increase the conductivity of the product and wear life we have a V shaped groove in the brass parts We offer industry leading custom CNC turning and milling Our...

    Contact Now

  • CNC machining copper parts

    CNC machining copper parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-009

    • Productivity: 5600/Month

    • Transportation: Ocean,Land,Air

    This is a process for over 800A current machining copper parts should be used in large scale welding machine accessories Copper machined parts have excellent electrical properties excellent corrosion resistance and ease of processing as well as good strength and fatigue resistance Pure copper color is red called red...

    Contact Now

  • Precision CNC machining bronze

    Precision CNC machining bronze

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-010

    • Productivity: 78000/Month

    • Transportation: Ocean,Land,Air

    This is a machining bronze parts for electrical plugs Because the parts to go through a number of insert and pull out so the choice of bronze material bronze parts is the best wear resistance and corrosion resistance in Cu We have three types of machining copper copper brass bronze Brass is added in the copper 25 to...

    Contact Now

  • Silver plated brass parts

    Silver plated brass parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-011

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    This is a silver plated brass turned parts for medical equipment Brass material has high hardness and good wear resistance Silver plated can increases the electrical conductivity of the brass turned parts We have three types of machining copper copper brass bronze Brass is added in the copper 25 to 40 Zn and other...

    Contact Now

  • Custom Copper Parts Milling

    Custom Copper Parts Milling

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-015

    • Productivity: 5600/Month

    • Transportation: Ocean,Land,Air

    Custom Copper Parts Milling This is a custom copper parts The reason why it is common because it does not add any other elements inside the material When added zinc and other metal in copper according to the addition of the ratio they are divided into brass and bronze Our company offers custom copper parts machining...

    Contact Now

  • Custom CNC Turning Machining Plastic Parts

    Custom CNC Turning Machining Plastic Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-102

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom CNC Turning Machining Plastic Parts When CNC turning plastic the increase of feed rate and cutting depth will shorten the cutting time and because of the improvement of heat dissipation conditions the decrease of cutting temperature and tool durability is not significant and it will not significantly increase...

    Contact Now

  • High Speed CNC Milling Machining Stainless Steel Parts

    High Speed CNC Milling Machining Stainless Steel Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-063

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Speed CNC Milling Machining Stainless Steel Parts This C shaped stainless steel custom parts is a product logo produced by our company for our customers It adopts the machining method of CNC machining logo After the completion of high speed milling stainless steel the surface of stainless steel custom parts will...

    Contact Now

  • CNC Milling Machining Small Aluminium Spare Parts

    CNC Milling Machining Small Aluminium Spare Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-083

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Small Aluminium Spare Parts Aluminum alloy has good mechanical properties small density good conductivity and thermal conductivity so aluminium spare parts are widely used in industry The strength and hardness of aluminum alloy are low and the cutting load is small Due to the good thermal...

    Contact Now

  • 4 Axis CNC Milling Machining Custom Parts

    4 Axis CNC Milling Machining Custom Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-082

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    4 Axis CNC Milling Machining Custom Parts We use the 4 axis CNC milling machining method for this part Because there are many surfaces to be machined for this machined milled parts it will be more troublesome to use the ordinary 3 axis machining As this machined milled parts is an exterior part we have also finished...

    Contact Now

  • CNC Milling Machining Copper Components

    CNC Milling Machining Copper Components

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-059

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Copper Components The milling cutter used for milling machining copper is mainly made of high speed steel and K type hard alloy When milling machining copper and other materials with large plasticity low hardness large cutting deformation and easy to stick the cutting edge of the milling cutter...

    Contact Now

  • 3 Axis CNC Machining Aluminum for Vape Box

    3 Axis CNC Machining Aluminum for Vape Box

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-214

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    3 Axis CNC Machining Aluminum for Vape Box After 3 axis CNC machining machining marks often appear on the surface of aluminum parts for vape box Although it does not affect the accuracy of aluminum parts for vape box it will make aluminum parts for vape box unsightly In this case we will advise the customer to...

    Contact Now

  • CNC Milling Machining Aluminum Parts for Wireless Handle

    CNC Milling Machining Aluminum Parts for Wireless Handle

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-213

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Wireless Handle In milling aluminium alloys the side edge machining requires a high degree of finish which can be solved by using a reasonable cutting speed The main reason for the poor finish of milling aluminium alloys is that the cutting speed is not selected properly...

    Contact Now

  • Turning Machining Ultem Parts and Accessories

    Turning Machining Ultem Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-100

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Turning Machining Ultem Parts and Accessories Ultem parts and accessories applications has good flame retardant low smoke rate and excellent chemical resistance Ultem parts and accessories applications are crack resistant in methyl ethyl ketone toluene and trichloroethylene Machining ultem rod is similar to other...

    Contact Now

  • Easy Milling Machining Green Plastic Plate Material

    Easy Milling Machining Green Plastic Plate Material

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-099

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Easy Milling Machining Green Plastic Plate Material In milling plastic plate material CNC machining is needed when the precision of machined plastic components is high In milling plastic plate material when the feed rate of the worktable is large and the spindle speed of the milling machine is high the machined...

    Contact Now

  • Milling Machining Stainless Steel Parts and Accessories

    Milling Machining Stainless Steel Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-062

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Milling Machining Stainless Steel Parts and Accessories Burr often occurs in 4 axis milling stainless steel parts and accessories which may be due to the material of stainless steel itself or the cutting tool is not sharp enough or the milling parameters are not set properly Burr not only reduces the accuracy and...

    Contact Now

  • Quality CNC Milling Machining Aluminum Products

    Quality CNC Milling Machining Aluminum Products

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-081

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Laser Jig Quality CNC machining is a complex and comprehensive work Quality CNC machining requires many technologies and the advanced technology affects the quality and efficiency of machining The level of quality CNC machining is also directly related to the machining accuracy...

    Contact Now

  • Turning Machining Brass Components on A Lathe

    Turning Machining Brass Components on A Lathe

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-058

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    Turning Machining Brass Components on A Lathe Methods to improve the surface quality of brass turning components processed by automatic lathe 1 Reduce the height of residual area In turning machining brass fittings the height of the residual area can be reduced by reducing the main deflection angle the secondary...

    Contact Now

Review

Mr.rafeek

Jan 28, 2020 5

I recommend you all this Milling Machining Of Brass . ALL are great!
Kulya Vitaly

Jan 11, 2020 5

It’s nice that Milling Machining Of Brass with good package, we will have next cooperation.
Mrs.lisa Phinney

Jan 05, 2020 5

Order delivered. good Milling Machining Of Brass and beautifully packaged. Included is all.thank you.
  • Related Information
The incredibly abundant projects administration experiences and 1 to one provider model make the superior importance of small business communication and our easy understanding of your expectations for Milling Machining Of Brass , Milling Machining of Brass , Milling Machining Brass , Russia and other countries. On the lookout ahead to make up a good and long-lasting cooperation with you in coming potential!
"We delight in an exceptionally good popularity amongst our customers for our fantastic product high quality, competitive cost as well as ideal service for Milling Machining Of Brass , Milling Machining of Brass , Milling Machining Brass , because of our company has been persisting in the management idea of "Survival by Quality Development by Service Benefit by Reputation" . We fully realize the good credit standing the high quality solutions the reasonable price and the qualified services are the reason that the customers choose us to be their long-term business partner.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List