Communicate with Supplier? Supplier
Sun Mr. Sun
What can I do for you?
Chat Now Contact Supplier

Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD

Precision Cnc Milling - manufacturer, factory, supplier from China

(Total 24 Products for Precision Cnc Milling)

  • Precision cnc milling machining parts

    Precision cnc milling machining parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-007

    • Productivity: 500/Month

    • Transportation: Ocean,Land,Air

    A Precision cnc milling machining parts used in conjunction with large machines Each face of the product should be machined the workpiece size tolerance 0 02mm We organized a special technical staff on the Special Machining Parts programming set up each cutting step cutting the amount of spindle speed A new product in...

    Contact Now

  • High Precision CNC Milling Machining parts

    High Precision CNC Milling Machining parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-009

    • Productivity: 78000/Month

    • Transportation: Ocean,Land,Air

    We attach importance to every customer every CNC milling machining drawing For each drawing will organize a small seminar to arrange the production schedule technical discussion process scheduling quality control point We focus on the CNC milling machining accumulation of technology product planning will be held...

    Contact Now

  • Precision cnc machining services

    Precision cnc machining services

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-018

    • Productivity: 78000/Month

    • Transportation: Ocean,Land,Air

    This is precision cnc machining services parts As a precision machining service shop we machine specialty parts out of any specified material from standard to exotic Some of the standard materials from which we CNC Milling machining include aluminum copper brass and steel as well as plasti Our knowledge and experience...

    Contact Now

  • Precision CNC Milling Aluminum Parts

    Precision CNC Milling Aluminum Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-029

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC machining center is a kind of mechanical cutting machine the motor drives the tool to rotate at high speed used for cutting various metal and non metal parts Our machines in the process of precision CNC milling aluminum machine spindle turret can be equipped with 21 knives used for cutting and turning Our company...

    Contact Now

  • Precision CNC Milling Machining Aluminium

    Precision CNC Milling Machining Aluminium

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-107

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom machining aluminium refers to the reproduction of aluminum products according to customer needs In this cost sensitive manufacturing industry the adoption of a modern machining aluminium approach is key to enhancing production competitiveness China is the world s largest producer and consumer of aluminum...

    Contact Now

  • Precision CNC Milling Aluminum Bracket

    Precision CNC Milling Aluminum Bracket

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-043

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision CNC Milling Aluminum Bracket In precision milling aluminum parts the knife point cut enter point cut out point methods of cut enter and cut out of cutting tools should be reasonably selected to ensure the stability of cut enter and cut out When the position accuracy of precision milling aluminum parts is...

    Contact Now

  • Custom CNC Milling Precision Aluminium Parts

    Custom CNC Milling Precision Aluminium Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-049

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Custom CNC Milling Precision Aluminium Parts Precision milling aluminium is a process that uses machining equipment to change the size shape or performance of the workpiece Precision milling aluminium provides a variety of aluminium parts for industrial production providing a variety of aluminium products for people s...

    Contact Now

  • Precision CNC Milling Machining Components

    Precision CNC Milling Machining Components

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-061

    • Productivity: 4600/Month

    Precision CNC Milling Machining Components The precision CNC milling machining of precision machined components can not be completed in one process The whole precision CNC milling machining process of precision machined components can be divided into the following stages 1 rough machining stage Most of the machining...

    Contact Now

  • High Precision CNC Machined Components for UAV

    High Precision CNC Machined Components for UAV

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-062

    • Productivity: 4600/Month

    High Precision CNC Machined Components for UAV Machined components for UAV using aluminum alloy as raw material through advanced CNC machining equipment system accurate calculation customized CNC machined components for UAV can be accurate to 0 01mm Buildre Group has advanced CNC machining equipment which can produce...

    Contact Now

  • CNC Miliing Machining Curved Surface Parts

    CNC Miliing Machining Curved Surface Parts

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-063

    • Productivity: 4600/Month

    CNC Miliing Machining Curved Surface Parts With the development of science and technology and the improvement of manufacturing level more and more machined curved surface parts are produced and the precision of machined curved surface parts is required more and more Milling machining curved surface parts has also been...

    Contact Now

  • Prototype CNC Machining Aluminum Parts Services

    Prototype CNC Machining Aluminum Parts Services

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-064

    • Productivity: 4600/Month

    Prototype CNC Machining Aluminum Parts Services After product design is completed before mass production prototype machined parts must be made to express design ideas quickly get feedback information of product design and evaluate and demonstrate the feasibility of product design Compared with rapid prototyping...

    Contact Now

  • Custom CNC Machining Parts for 3D Printer

    Custom CNC Machining Parts for 3D Printer

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-065

    • Productivity: 4600/Month

    Custom CNC Machining Parts for 3D Printer This is a CNC machined parts for 3D printer Each 3D printer contains many CNC machined parts for 3D printer and the merits and demerits of CNC machined parts for 3D printer determine the merits and demerits of 3D printer and the price of 3D printer The size of CNC machined...

    Contact Now

  • Rapid cnc Machining Aluminum Components

    Rapid cnc Machining Aluminum Components

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-066

    • Productivity: 4600/Month

    Rapid cnc Machining Aluminum Components This rapid CNC machined components is manufactured by our 4 axis CNC machine With this 4 axis CNC machine three surfaces can be machined at one clamping which greatly improves the efficiency of rapid precision machining The speed of 4 axis CNC machine can reach 20 000...

    Contact Now

  • High Precision CNC Milling Custom Aluminium Products

    High Precision CNC Milling Custom Aluminium Products

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-204

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Precision CNC Milling Custom Aluminium Products This is a customized heating module for round bottom flasks processed according to customer requirements This custom aluminium products chooses non sand hole aluminium block with good thermal conductivity for high precision CNC milling aluminium alloy so this custom...

    Contact Now

  • Precision CNC Milling Small Aluminum Parts

    Precision CNC Milling Small Aluminum Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-207

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision CNC Milling Small Aluminum Parts This is a small CNC milling parts high precision requirements which can not be achieved by laser cutting so we use CNC precision metal milling to process this small CNC milling parts Because this aluminum CNC milling parts are very small and the quantity is large the machine...

    Contact Now

  • Custom CNC Turning Machining Plastic Parts

    Custom CNC Turning Machining Plastic Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-102

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom CNC Turning Machining Plastic Parts When CNC turning plastic the increase of feed rate and cutting depth will shorten the cutting time and because of the improvement of heat dissipation conditions the decrease of cutting temperature and tool durability is not significant and it will not significantly increase...

    Contact Now

  • High Speed CNC Milling Machining Stainless Steel Parts

    High Speed CNC Milling Machining Stainless Steel Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-063

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Speed CNC Milling Machining Stainless Steel Parts This C shaped stainless steel custom parts is a product logo produced by our company for our customers It adopts the machining method of CNC machining logo After the completion of high speed milling stainless steel the surface of stainless steel custom parts will...

    Contact Now

  • CNC Milling Machining Small Aluminium Spare Parts

    CNC Milling Machining Small Aluminium Spare Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-083

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Small Aluminium Spare Parts Aluminum alloy has good mechanical properties small density good conductivity and thermal conductivity so aluminium spare parts are widely used in industry The strength and hardness of aluminum alloy are low and the cutting load is small Due to the good thermal...

    Contact Now

  • Machined Ultem Parts with CNC Logo

    Machined Ultem Parts with CNC Logo

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-101

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machined Ultem Parts with CNC Logo Machined ultem parts and accessories are extremely suitable for electrical and electronic insulating parts including many semiconductor process components as well as a series of structural components These machined ultem parts and accessories require high strength and rigidity at...

    Contact Now

  • 4 Axis CNC Milling Machining Custom Parts

    4 Axis CNC Milling Machining Custom Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-082

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    4 Axis CNC Milling Machining Custom Parts We use the 4 axis CNC milling machining method for this part Because there are many surfaces to be machined for this machined milled parts it will be more troublesome to use the ordinary 3 axis machining As this machined milled parts is an exterior part we have also finished...

    Contact Now

  • Surface Treatment for Aluminium CNC Parts

    Surface Treatment for Aluminium CNC Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-215

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Surface Treatment for Aluminium CNC Parts There are many different forms of small aluminium parts surface treatment such as sandblasting to form a matte pearl silver surface polishing to form a mirror surface embossing pressing out various textures plating covering other metals spraying covering other non metallic...

    Contact Now

  • CNC Milling Machining Copper Components

    CNC Milling Machining Copper Components

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-059

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Copper Components The milling cutter used for milling machining copper is mainly made of high speed steel and K type hard alloy When milling machining copper and other materials with large plasticity low hardness large cutting deformation and easy to stick the cutting edge of the milling cutter...

    Contact Now

  • 3 Axis CNC Machining Aluminum for Vape Box

    3 Axis CNC Machining Aluminum for Vape Box

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-214

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    3 Axis CNC Machining Aluminum for Vape Box After 3 axis CNC machining machining marks often appear on the surface of aluminum parts for vape box Although it does not affect the accuracy of aluminum parts for vape box it will make aluminum parts for vape box unsightly In this case we will advise the customer to...

    Contact Now

  • CNC Milling Machining Aluminum Parts for Wireless Handle

    CNC Milling Machining Aluminum Parts for Wireless Handle

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-213

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Wireless Handle In milling aluminium alloys the side edge machining requires a high degree of finish which can be solved by using a reasonable cutting speed The main reason for the poor finish of milling aluminium alloys is that the cutting speed is not selected properly...

    Contact Now

Review

Punit Patade

Jan 29, 2020 5

The price of the Precision Cnc Milling is very reasonable, its quality is also very good
Juan Ramirez

Jan 16, 2020 4

Great value.
Dheeraj Jain

Jan 09, 2020 4

Thank you for your quick delivery. Good Precision Cnc Milling with good price.
  • Related Information
To continuously increase the administration process by virtue of the rule of "sincerely, good religion and excellent are the base of company development", we commonly absorb the essence of linked goods internationally, and continually build new solutions to fulfill the requires of shoppers for Precision Cnc Milling , Precision CNC Milling , Precision Metal Milling , Safety through innovation is our promise to each other.
"With our superb management, potent technical capability and strict quality command procedure, we go on to provide our shoppers with trustworthy high-quality, reasonable costs and outstanding services. We goal at becoming considered one of your most trustworthy partners and earning your pleasure for Precision Cnc Milling , Precision CNC Milling , Precision Metal Milling , They are sturdy modeling and promoting effectively all over the world. Never ever disappearing major functions within a quick time it's a have to for you personally of fantastic good quality. Guided by the principle of "Prudence Efficiency Union and Innovation. the corporation. ake an excellent efforts to expand its international trade raise its organization. rofit and raise its export scale. We are confident that we've been likely to have a bright prospect and to be distributed all over the world in the years to come.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List