Communicate with Supplier? Supplier
Sun Mr. Sun
What can I do for you?
Chat Now Contact Supplier

Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD

Precision Turned Parts - manufacturer, factory, supplier from China

(Total 24 Products for Precision Turned Parts)

  • Precision Engineering Parts Aluminum

    Precision Engineering Parts Aluminum

    • Min. Order: 1 Bag/Bags

    • Model No.: TU-026

    • Productivity: 1300/Month

    • Transportation: Ocean,Land,Air

    This is a complex and difficult Precision Turned Parts all dimensions of 0 02mm there are some 0 01mm Precision Turned Components process include CNC turning milling drilling Our CNC Turning Center is equipped with a multi station turret or power turret The machine has a wide range of processing performance Machinable...

    Contact Now

  • Silver Plated Brass Parts for Slip Ring

    Silver Plated Brass Parts for Slip Ring

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-037

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    Silver Plated Brass Parts for Slip Ring Slip rings are usually made of copper or brass parts brass parts for slip ring has wearable and well conductive and are plated with gold silver or rhodium according to various applications The brass parts for slip ring has good sliding characteristics so the utility model has...

    Contact Now

  • Precision Turned Red Anodized Aluminum Bike Parts

    Precision Turned Red Anodized Aluminum Bike Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-197

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision Turned Red Aluminum Bike Parts The turned aluminum bike parts are machined by using CNC turning machine to machining a whole aluminum bar Because the whole process of CNC aluminum machining is completed in one clamp before cutting off because turned aluminum bike parts are connected with the bottom of the...

    Contact Now

  • Custom CNC Turning Machining Plastic Parts

    Custom CNC Turning Machining Plastic Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-102

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom CNC Turning Machining Plastic Parts When CNC turning plastic the increase of feed rate and cutting depth will shorten the cutting time and because of the improvement of heat dissipation conditions the decrease of cutting temperature and tool durability is not significant and it will not significantly increase...

    Contact Now

  • High Speed CNC Milling Machining Stainless Steel Parts

    High Speed CNC Milling Machining Stainless Steel Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-063

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Speed CNC Milling Machining Stainless Steel Parts This C shaped stainless steel custom parts is a product logo produced by our company for our customers It adopts the machining method of CNC machining logo After the completion of high speed milling stainless steel the surface of stainless steel custom parts will...

    Contact Now

  • CNC Milling Machining Small Aluminium Spare Parts

    CNC Milling Machining Small Aluminium Spare Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-083

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Small Aluminium Spare Parts Aluminum alloy has good mechanical properties small density good conductivity and thermal conductivity so aluminium spare parts are widely used in industry The strength and hardness of aluminum alloy are low and the cutting load is small Due to the good thermal...

    Contact Now

  • Machined Ultem Parts with CNC Logo

    Machined Ultem Parts with CNC Logo

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-101

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machined Ultem Parts with CNC Logo Machined ultem parts and accessories are extremely suitable for electrical and electronic insulating parts including many semiconductor process components as well as a series of structural components These machined ultem parts and accessories require high strength and rigidity at...

    Contact Now

  • 4 Axis CNC Milling Machining Custom Parts

    4 Axis CNC Milling Machining Custom Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-082

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    4 Axis CNC Milling Machining Custom Parts We use the 4 axis CNC milling machining method for this part Because there are many surfaces to be machined for this machined milled parts it will be more troublesome to use the ordinary 3 axis machining As this machined milled parts is an exterior part we have also finished...

    Contact Now

  • Surface Treatment for Aluminium CNC Parts

    Surface Treatment for Aluminium CNC Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-215

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Surface Treatment for Aluminium CNC Parts There are many different forms of small aluminium parts surface treatment such as sandblasting to form a matte pearl silver surface polishing to form a mirror surface embossing pressing out various textures plating covering other metals spraying covering other non metallic...

    Contact Now

  • CNC Milling Machining Aluminum Parts for Wireless Handle

    CNC Milling Machining Aluminum Parts for Wireless Handle

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-213

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Wireless Handle In milling aluminium alloys the side edge machining requires a high degree of finish which can be solved by using a reasonable cutting speed The main reason for the poor finish of milling aluminium alloys is that the cutting speed is not selected properly...

    Contact Now

  • Turning Machining Ultem Parts and Accessories

    Turning Machining Ultem Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-100

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Turning Machining Ultem Parts and Accessories Ultem parts and accessories applications has good flame retardant low smoke rate and excellent chemical resistance Ultem parts and accessories applications are crack resistant in methyl ethyl ketone toluene and trichloroethylene Machining ultem rod is similar to other...

    Contact Now

  • Milling Machining Stainless Steel Parts and Accessories

    Milling Machining Stainless Steel Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-062

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Milling Machining Stainless Steel Parts and Accessories Burr often occurs in 4 axis milling stainless steel parts and accessories which may be due to the material of stainless steel itself or the cutting tool is not sharp enough or the milling parameters are not set properly Burr not only reduces the accuracy and...

    Contact Now

  • Machining Aluminum Parts with Diamond Knurling Pattern

    Machining Aluminum Parts with Diamond Knurling Pattern

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-178

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Machining Aluminum Parts with Diamond Knurling Pattern The force of machining diamond knurling pattern on aluminum parts on a lathe is quite large and the workpiece must be firmly clamped When installing the knurling knives the cutter face should be perpendicular to the workpiece and the center of the flower wheel...

    Contact Now

  • CNC Milling Machining Simple Aluminum Parts Hardware

    CNC Milling Machining Simple Aluminum Parts Hardware

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-212

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Simple Aluminum Parts Hardware We machining this simple aluminum parts hardware with special fixture made by ourself The special fixture is specially designed according to the requirements of the machining procedure of CNC small aluminum parts The positioning elements on the fixture can make the...

    Contact Now

  • Precision Machining Custom Aluminum Parts and Accessories

    Precision Machining Custom Aluminum Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-211

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision Machining Custom Aluminum Parts and Accessories Precision aluminum parts and accessories machining is to complete the machining of the main surface requirements according to the machining steps and procedures including the parallelism surface finish surface perpendicularity surface hardness etc so as to make...

    Contact Now

  • Machining Custom Nylon Parts on A Lathe

    Machining Custom Nylon Parts on A Lathe

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-097

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machining Custom Nylon Parts on A Lathe Because custom nylon parts has non toxic light weight excellent mechanical strength wear resistance and good corrosion resistance custom nylon parts is widely used to replace copper and other metals in the manufacturing of bearings gears pump blades and other parts in machinery...

    Contact Now

  • CNC Turning Machining POM Plastic Parts

    CNC Turning Machining POM Plastic Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-096

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Turning Machining POM Plastic Parts Compared with other engineering plastics the price of POM plastic parts is low but there are some disadvantages of POM plastic parts such as poor toughness large shrinkage low notch impact strength and so on POM material is suitable for making parts with precise dimensional...

    Contact Now

  • CNC Milling Machining Aluminum Parts for Laser Jig

    CNC Milling Machining Aluminum Parts for Laser Jig

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-051

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Laser Jig This is an aluminum parts for laser jig made by our factory CNC milling machining aluminum parts for laser jig is the process of using CNC machine tools to change the shape size relative position and nature of aluminum blank to machining it into aluminum laser jig...

    Contact Now

  • CNC Machining Aluminum Billet Brackets Parts

    CNC Machining Aluminum Billet Brackets Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-210

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machining Aluminum Billet Brackets Parts Advantages of machined aluminum billet brackets 1 light weight Compared with some other iron supports machined aluminum billet brackets are lighter in weight because of the low density of aluminum 2 Natural corrosion resistance Oxygen in the air can react with aluminum to...

    Contact Now

  • Custom Machining Small Stainless Steel Parts

    Custom Machining Small Stainless Steel Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-058

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom Machining Small Stainless Steel Parts With the rapid development of aerospace hydraulic communication medical equipment and other industries many high precision multi batch complex shape of small stainless steel parts turn milling compound machining has put forward a great challenge to the machinery...

    Contact Now

  • CNC Machining Complex Aluminum Parts and Accessories

    CNC Machining Complex Aluminum Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-209

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machining Complex Aluminum Parts and Accessories The blank of complex custom aluminum parts and accessories is bar pipe or thick plate Most of the surplus is removed after machining complex components and only 1 10 to 1 20 of the original weight is retained finally The material removal is large the original fiber...

    Contact Now

  • High Speed Machining Milling Aluminum Parts

    High Speed Machining Milling Aluminum Parts

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-080

    • Productivity: 4600/Month

    High Speed Machining Milling Aluminum Parts High speed machining milling aluminum allows a larger feed rate which is 5 to 10 times higher than that of conventional aluminum machining CNC milling The material removal rate per unit time can be increased by 3 to 6 times and the machining time can be greatly reduced High...

    Contact Now

  • CNC Machining Increase Accuracy for Casting Steel Parts

    CNC Machining Increase Accuracy for Casting Steel Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: MS-024

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machining Increase Accuracy for Casting Steel Parts Steel is a kind of material which is difficult to machining in CNC machining materials If a large amount of fabricated steel parts are machined by CNC the cost is very expensive At this time we can use the casting process to produce the basic shape of the...

    Contact Now

  • Precision CNC Milling Small Aluminum Parts

    Precision CNC Milling Small Aluminum Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-207

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision CNC Milling Small Aluminum Parts This is a small CNC milling parts high precision requirements which can not be achieved by laser cutting so we use CNC precision metal milling to process this small CNC milling parts Because this aluminum CNC milling parts are very small and the quantity is large the machine...

    Contact Now

Review

Mr.patric Savard

Jan 26, 2020 5

Thanks, manufacturers of the Precision Turned Parts .
Mr.baier

Jan 18, 2020 5

I can complain nothing about it.
Eva Hu

Jan 14, 2020 4

I bought the Precision Turned Parts , and just think this one may meet my needs. Unexpectedly, it is a good thing.
  • Related Information
we are able to provide good quality items, aggressive rate and best shopper assistance. Our destination is "You come here with difficulty and we provide you with a smile to take away" for Precision Turned Parts , Brass Precision Turned Parts , Precision Turned Bronze Parts , tutorial and negotiate.
"Our well-equipped facilities and exceptional top quality management throughout all stages of generation enables us to guarantee total buyer gratification for Precision Turned Parts , Brass Precision Turned Parts , Precision Turned Bronze Parts , With the intensified strength and more reliable credit we are here to serve our customers by providing the highest quality and service and we sincerely appreciate your support. We will endeavor to maintain our great reputation as the best products supplier in the world. If you have any questions or comments please contact with us freely.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List