Communicate with Supplier? Supplier
Sun Mr. Sun
What can I do for you?
Chat Now Contact Supplier

Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD

Silver Plated Brass Parts - manufacturer, factory, supplier from China

(Total 24 Products for Silver Plated Brass Parts)

  • Silver plated machining brass parts

    Silver plated machining brass parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-003

    • Productivity: 15600/Month

    • Transportation: Ocean,Land,Air

    This is a brass for machining on slip ring Surface silver plating increases conductivity Brass ring good conductivity and thermal conductivity and high hardness good wear resistance We will be brass machining parts used in the slip ring you can transmit 1000MHz signal We have three types of machining copper copper...

    Contact Now

  • Silver plated brass parts

    Silver plated brass parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-011

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    This is a silver plated brass turned parts for medical equipment Brass material has high hardness and good wear resistance Silver plated can increases the electrical conductivity of the brass turned parts We have three types of machining copper copper brass bronze Brass is added in the copper 25 to 40 Zn and other...

    Contact Now

  • Silver Plated Brass Parts for Slip Ring

    Silver Plated Brass Parts for Slip Ring

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-037

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    Silver Plated Brass Parts for Slip Ring Slip rings are usually made of copper or brass parts brass parts for slip ring has wearable and well conductive and are plated with gold silver or rhodium according to various applications The brass parts for slip ring has good sliding characteristics so the utility model has...

    Contact Now

  • Custom CNC Turning Machining Plastic Parts

    Custom CNC Turning Machining Plastic Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-102

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom CNC Turning Machining Plastic Parts When CNC turning plastic the increase of feed rate and cutting depth will shorten the cutting time and because of the improvement of heat dissipation conditions the decrease of cutting temperature and tool durability is not significant and it will not significantly increase...

    Contact Now

  • High Speed CNC Milling Machining Stainless Steel Parts

    High Speed CNC Milling Machining Stainless Steel Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-063

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Speed CNC Milling Machining Stainless Steel Parts This C shaped stainless steel custom parts is a product logo produced by our company for our customers It adopts the machining method of CNC machining logo After the completion of high speed milling stainless steel the surface of stainless steel custom parts will...

    Contact Now

  • CNC Milling Machining Small Aluminium Spare Parts

    CNC Milling Machining Small Aluminium Spare Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-083

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Small Aluminium Spare Parts Aluminum alloy has good mechanical properties small density good conductivity and thermal conductivity so aluminium spare parts are widely used in industry The strength and hardness of aluminum alloy are low and the cutting load is small Due to the good thermal...

    Contact Now

  • Machined Ultem Parts with CNC Logo

    Machined Ultem Parts with CNC Logo

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-101

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machined Ultem Parts with CNC Logo Machined ultem parts and accessories are extremely suitable for electrical and electronic insulating parts including many semiconductor process components as well as a series of structural components These machined ultem parts and accessories require high strength and rigidity at...

    Contact Now

  • 4 Axis CNC Milling Machining Custom Parts

    4 Axis CNC Milling Machining Custom Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-082

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    4 Axis CNC Milling Machining Custom Parts We use the 4 axis CNC milling machining method for this part Because there are many surfaces to be machined for this machined milled parts it will be more troublesome to use the ordinary 3 axis machining As this machined milled parts is an exterior part we have also finished...

    Contact Now

  • Surface Treatment for Aluminium CNC Parts

    Surface Treatment for Aluminium CNC Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-215

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Surface Treatment for Aluminium CNC Parts There are many different forms of small aluminium parts surface treatment such as sandblasting to form a matte pearl silver surface polishing to form a mirror surface embossing pressing out various textures plating covering other metals spraying covering other non metallic...

    Contact Now

  • CNC Milling Machining Aluminum Parts for Wireless Handle

    CNC Milling Machining Aluminum Parts for Wireless Handle

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-213

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Wireless Handle In milling aluminium alloys the side edge machining requires a high degree of finish which can be solved by using a reasonable cutting speed The main reason for the poor finish of milling aluminium alloys is that the cutting speed is not selected properly...

    Contact Now

  • Turning Machining Ultem Parts and Accessories

    Turning Machining Ultem Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-100

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Turning Machining Ultem Parts and Accessories Ultem parts and accessories applications has good flame retardant low smoke rate and excellent chemical resistance Ultem parts and accessories applications are crack resistant in methyl ethyl ketone toluene and trichloroethylene Machining ultem rod is similar to other...

    Contact Now

  • Milling Machining Stainless Steel Parts and Accessories

    Milling Machining Stainless Steel Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-062

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Milling Machining Stainless Steel Parts and Accessories Burr often occurs in 4 axis milling stainless steel parts and accessories which may be due to the material of stainless steel itself or the cutting tool is not sharp enough or the milling parameters are not set properly Burr not only reduces the accuracy and...

    Contact Now

  • Turning Machining Brass Components on A Lathe

    Turning Machining Brass Components on A Lathe

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-058

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    Turning Machining Brass Components on A Lathe Methods to improve the surface quality of brass turning components processed by automatic lathe 1 Reduce the height of residual area In turning machining brass fittings the height of the residual area can be reduced by reducing the main deflection angle the secondary...

    Contact Now

  • Machining Aluminum Parts with Diamond Knurling Pattern

    Machining Aluminum Parts with Diamond Knurling Pattern

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-178

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Machining Aluminum Parts with Diamond Knurling Pattern The force of machining diamond knurling pattern on aluminum parts on a lathe is quite large and the workpiece must be firmly clamped When installing the knurling knives the cutter face should be perpendicular to the workpiece and the center of the flower wheel...

    Contact Now

  • CNC Milling Machining Simple Aluminum Parts Hardware

    CNC Milling Machining Simple Aluminum Parts Hardware

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-212

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Simple Aluminum Parts Hardware We machining this simple aluminum parts hardware with special fixture made by ourself The special fixture is specially designed according to the requirements of the machining procedure of CNC small aluminum parts The positioning elements on the fixture can make the...

    Contact Now

  • Precision Machining Custom Aluminum Parts and Accessories

    Precision Machining Custom Aluminum Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-211

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision Machining Custom Aluminum Parts and Accessories Precision aluminum parts and accessories machining is to complete the machining of the main surface requirements according to the machining steps and procedures including the parallelism surface finish surface perpendicularity surface hardness etc so as to make...

    Contact Now

  • Machining Custom Nylon Parts on A Lathe

    Machining Custom Nylon Parts on A Lathe

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-097

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machining Custom Nylon Parts on A Lathe Because custom nylon parts has non toxic light weight excellent mechanical strength wear resistance and good corrosion resistance custom nylon parts is widely used to replace copper and other metals in the manufacturing of bearings gears pump blades and other parts in machinery...

    Contact Now

  • CNC Turning Machining POM Plastic Parts

    CNC Turning Machining POM Plastic Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-096

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Turning Machining POM Plastic Parts Compared with other engineering plastics the price of POM plastic parts is low but there are some disadvantages of POM plastic parts such as poor toughness large shrinkage low notch impact strength and so on POM material is suitable for making parts with precise dimensional...

    Contact Now

  • CNC Milling Machining Aluminum Parts for Laser Jig

    CNC Milling Machining Aluminum Parts for Laser Jig

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-051

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Laser Jig This is an aluminum parts for laser jig made by our factory CNC milling machining aluminum parts for laser jig is the process of using CNC machine tools to change the shape size relative position and nature of aluminum blank to machining it into aluminum laser jig...

    Contact Now

  • CNC Machining Aluminum Billet Brackets Parts

    CNC Machining Aluminum Billet Brackets Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-210

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machining Aluminum Billet Brackets Parts Advantages of machined aluminum billet brackets 1 light weight Compared with some other iron supports machined aluminum billet brackets are lighter in weight because of the low density of aluminum 2 Natural corrosion resistance Oxygen in the air can react with aluminum to...

    Contact Now

  • Custom Machining Small Stainless Steel Parts

    Custom Machining Small Stainless Steel Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-058

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom Machining Small Stainless Steel Parts With the rapid development of aerospace hydraulic communication medical equipment and other industries many high precision multi batch complex shape of small stainless steel parts turn milling compound machining has put forward a great challenge to the machinery...

    Contact Now

  • CNC Machining Complex Aluminum Parts and Accessories

    CNC Machining Complex Aluminum Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-209

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machining Complex Aluminum Parts and Accessories The blank of complex custom aluminum parts and accessories is bar pipe or thick plate Most of the surplus is removed after machining complex components and only 1 10 to 1 20 of the original weight is retained finally The material removal is large the original fiber...

    Contact Now

  • High Speed Machining Milling Aluminum Parts

    High Speed Machining Milling Aluminum Parts

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-080

    • Productivity: 4600/Month

    High Speed Machining Milling Aluminum Parts High speed machining milling aluminum allows a larger feed rate which is 5 to 10 times higher than that of conventional aluminum machining CNC milling The material removal rate per unit time can be increased by 3 to 6 times and the machining time can be greatly reduced High...

    Contact Now

  • CNC Machining Increase Accuracy for Casting Steel Parts

    CNC Machining Increase Accuracy for Casting Steel Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: MS-024

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machining Increase Accuracy for Casting Steel Parts Steel is a kind of material which is difficult to machining in CNC machining materials If a large amount of fabricated steel parts are machined by CNC the cost is very expensive At this time we can use the casting process to produce the basic shape of the...

    Contact Now

Review

Kyle North

Jan 15, 2020 5

Very satisfied with the Silver Plated Brass Parts , the after sales support is excellent, any queries will be answered in minutes.I highly recommend Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD team.
Robin Jeffries

Jan 11, 2020 5

The manufacturer always online answers questions, very helpful. THE whole product is very satisfied. Happy, recommend.
Ka Tuan

Jan 05, 2020 4

All recieved as described. Safe and reliable transaction. I already introduce Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD to my friend.
  • Related Information
we should do our utmost to help you. We warmly welcome customers from all over the world to cooperate with us for Silver Plated Brass Parts , Silver Plated Brass , Plated Brass Parts , we sincerely welcome clientele from at your house and abroad to cooperate with us.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List