Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Min. Order:1 Bag/Bags
Model No:AL-036
Transportation:Ocean,Land,Air
Productivity:2600/Month
CNC lathe machining is a sophisticated hardware parts of high-tech machining methods. Machinable various types of materials, 316, 304 stainless steel, carbon steel, alloy steel, aluminum alloy, zinc alloy, titanium alloy, copper, iron, plastic,...
Min. Order:1 Bag/Bags
Model No:AL-059
Transportation:Ocean,Land,Air
Productivity:4600/Month
In general, the method and process for machining aluminum blocks are determined depending on the thickness of the block of aluminum parts to be processed. When the bock of aluminum parts thickness ≥ 100mm, machining aluminum block will use sawing...
Min. Order:1 Bag/Bags
Model No:AL-058
Transportation:Ocean,Land,Air
Productivity:4600/Month
The density of aluminum alloy is about 1/3 of the steel, while the elastic modulus is close to that of the steel, which leads to greater springback of the thin aluminium sheet. In prophase process autoform simulation is needed to compensate...
Min. Order:1 Bag/Bags
Model No:AL-057
Transportation:Ocean,Land,Air
Productivity:2600/Month
It is easy to occur sticky knife in high speed milling aluminum parts, and it mainly due to the characteristics of aluminum parts. Compared with the majority of steel and cast iron, metal aluminum parts have the characters of lower yield strength...
Min. Order:1 Bag/Bags
Model No:AL-053
Transportation:Ocean,Land,Air
Productivity:4600/Month
Thin aluminum sheet in the aviation, energy and other fields of application is very extensive. But the stiffness of the thin aluminum sheet parts is relatively low, and it is easy to deform during the milling process, milling process produced by the...
Min. Order:1 Bag/Bags
Model No:AL-056
Transportation:Ocean,Land,Air
Productivity:2600/Month
Aluminum housing parts is a variety of shell made of aluminum alloy, Aluminum housing parts material achievements of its high-grade fire and explosion-proof function. Aluminum housing parts because of convenient processing, high flexibility, higher...
Min. Order:1 Bag/Bags
Model No:AL-052
Transportation:Ocean,Land,Air
Productivity:2600/Month
Small metal parts is used in military, aerospace engineering and communications, automotive. Do not underestimate it is just a small metal parts, it has a connected, fixed and beautiful role, the fixed place to tighten the seamless connection, the...
Min. Order:1 Bag/Bags
Model No:AL-051
Transportation:Ocean,Land,Air
Productivity:7800/Month
Our company has 10 years of experience in custom metal fabrication, and is a large manufacturer of machining metal and plastic parts. In high volume machining, based on the workpiece aluminum alloy is soft with a high degree of ductility, aluminum...
Min. Order:1 Bag/Bags
Model No:AL-043
Transportation:Ocean,Land,Air
Productivity:2600/Month
The use of metal cutting tools from the metal material (rough) cut off the excess metal layer, so as to obtain the shape, dimensional accuracy and surface quality are in line with the requirements of the drawings, such machining methods known as...
Min. Order:1 Bag/Bags
Model No:AL-050
Transportation:Ocean,Land,Air
Productivity:7800/Month
Internal thread cutting can be made in several different ways. In traditional internal thread cutting, thread taps can be used to cut the internal threads by manual or maneuvering in a pre drilled holes. With the development of CNC machine tools,...
Min. Order:1 Bag/Bags
Model No:AL-049
Transportation:Ocean,Land,Air
Productivity:7800/Month
5052 aluminum parts is a kind of the most widely used antirust aluminum parts, in the CNC aluminium milling process, it has good forming performance, high strength, especially with anti fatigue strength, good cold workability, can not heat treatment...
Min. Order:1 Bag/Bags
Model No:AL-048
Transportation:Ocean,Land,Air
Productivity:7800/Month
Aluminum alloy parts by hard anodized, the surface can be formed thickness of 30 ~ 50μm and hardness of about 500HV film layer, with excellent corrosion resistance and wear resistance. This hard anodized aluminum parts can be directly assembled and...
Min. Order:1 Bag/Bags
Model No:AL-047
Transportation:Ocean,Land,Air
Productivity:2600/Month
This is an anodising of aluminum part, it is first machined by CNC milling and then black anodizing processing. In the case of mechanical cutting, not only the cutting force but also the cutting motion are provided by the machinery. With the help of...
Min. Order:1 Bag/Bags
Model No:AL-035
Transportation:Ocean,Land,Air
Productivity:2600/Month
CNC lathe machining is a high-precision, efficient automatic machine tool, using digital information to control parts and tool displacement machining method. It is an effective way to solve the problems of variety, small batch, complex shape and...
Min. Order:1 Bag/Bags
Model No:AL-044
Transportation:Ocean,Land,Air
Productivity:2600/Month
7075 aluminum alloy is a cold treatment forging alloy, high strength, much better than soft steel. 7075 aluminum alloy structure close, strong corrosion resistance, good mechanical properties and anode reaction. Small grain size makes the deep...
Min. Order:1 Bag/Bags
Model No:AL-042
Transportation:Ocean,Land,Air
Productivity:2600/Month
This is an anodized aluminum boat parts. A boat, in addition to the main hull, the rest are the boat parts. Boat parts required for tens of thousands of parts, these parts are small, but the role can not be overlooked. Aluminum parts is one of the...
Min. Order:1 Bag/Bags
Model No:AL-041
Transportation:Ocean,Land,Air
Productivity:7800/Month
When machining turning aluminum parts, roughing and finishing use cutting fluid is not the same function, the choice of cutting fluid is also very different. Rough machining should choose water-based cutting fluid that cooling as the mainly function...
Min. Order:1 Bag/Bags
Model No:AL-039
Transportation:Ocean,Land,Air
Productivity:2600/Month
In the part pattern, usually only specified the size of the tolerance, the requirements of the higher parts, in addition to the specified size tolerance, but also to specify the shape tolerance and position tolerance. General machining, the higher...
Min. Order:1 Bag/Bags
Model No:AL-037
Transportation:Ocean,Land,Air
Productivity:2600/Month
When machining parts with CNC machine tools, first of all should compile the parts processing program as CNC machine work instructions, sent the machining program to the numerical control device, the numerical control device control the main...
Min. Order:1 Bag/Bags
Model No:AL-034
Transportation:Ocean,Land,Air
Productivity:2600/Month
Now, with the continuous improvement of people's living standards, we often use aluminum parts machining, which gives our lives a great convenience. We are in the aluminum parts machining of the time to pay attention to detail, this way can produce...
Min. Order:1 Bag/Bags
Model No:AL-033
Transportation:Ocean,Land,Air
Productivity:2600/Month
Aluminium parts relative to other metal parts, it is no metal pollution, no toxicity, the appearance of oxide layer without volatile metal. Aluminium parts has a strong corrosion resistance, and has excellent thermal function and conductive...
Min. Order:1 Bag/Bags
Model No:AL-032
Transportation:Ocean,Land,Air
Productivity:2600/Month
As we all know, the purchase of aluminum components are to install to other equipment, to show greater results, but if you buy a defective aluminum components, not only their own use of life reduction, more likely to damage the use of equipment....
Min. Order:1 Bag/Bags
Model No:AL-031
Transportation:Ocean,Land,Air
Productivity:2600/Month
Cast aluminum parts density is smaller than cast iron parts and cast steel parts, and the specific strength is higher. Therefore, under the same load conditions using cast aluminum parts, can reduce the weight of the structure, so in the aviation...
Min. Order:1 Bag/Bags
Model No:AL-030
Transportation:Ocean,Land,Air
Productivity:2600/Month
In the procession of machining aluminum blocks, aluminum blocks can be heat treated to obtain good mechanical properties, physical properties and corrosion resistance. Aluminum blocks has been widely used in aerospace, automotive, machinery...
Aluminum Machining is the use of CNC Machining out, including: drilling, boring, cutting, turning, screw. Product material are: aluminum6061,6061-T6,6063,6083,7075.5052,2017 .In the high-speed machining out of the workpiece has a good finish. Aluminum machining product surface treatment has anode, electroplating, sand blasting, laser engraving LOGO, mechanical drawing, rolling flower, according to the requirements of the drawings on the product anode all kinds of colors such as color, black, red, blue, yellow. We have a special inspection department to carry out inspection, to ensure that each size of products meet the requirements of the drawings, Machining Aluminum(cnc aluminum) is the most common in mechanical processing, low density, not easy deformation, high precision products. So it is widely used in various industries.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.