Machining PEEK Plastic Parts

  Machining PEEK plastic parts high temperature resistant properties are very prominent, can be used at 250 degrees for a long time, the instant use of temperature up to 315 degrees celsius. The rigidity of Machining PEEK plastic parts is large, the dimension stability and coefficient of linear expansion is smaller, and close to aluminum parts. Machining PEEK plastic parts has superior dimensional stability, which is important for some applications. The changes of temperature, humidity and other environmental conditions have little influence on the size of machining PEEK plastic parts. They can meet the requirements of high dimensional accuracy. The coefficient of thermal expansion is small, and the size of machining PEEK plastic parts varies little with the change of temperature (can be caused by the change of environment temperature or the heat build-up during the operation). Machining PEEK plastic parts heat resistant hydrolysis characteristics prominent, in high temperature and humidity environment, water absorption is very low, will not appear like nylon and other general plastic make obvious change the size because of water absorption.

  1 Equipment Capabilities

• CNC Machinig Center, 3 Axis, 4 Axis.
• CNC Lathe, Lathe, CNC Turning Centers, Horizontal 8/12-position hydraulic turret.
• Milling Machine
• Grinding Machine
• Drill Press
  
• Tapping Center
  
• Rotary Indexer
  
• Punch

   

  2 Machining Processes

• CNC Milling CNC Turning
• CNC Milling
• CAM Programming  
• Sheet Metal Fabrication
• Grinding
• Cutting       
• Thread Turning / Milling threading
• Tapping
• Drilling
• Knurling
  

  3 Material ( Machining Metal )

• Titanium
  
• Aluminum 6061, 6061-T6, 6063, 7075, 5052, 2024, 2017.
• Copper, Brass, Bronze, Phosphor Bronze. ( C10100, C10200, C11000, C12200, C26000, C27000, C28000, C33000, C220, C510, C630 )
• Stainless Steel 303, 304, 316 ( 1.4305, 1.4301 )
• Steel Ordinary carbon structural Steel, Quality carbon structural steel, cast steel, Iron.(Q195, Q215, Q235, Q255, 10#, 20#, 35#, 45#, 718H, S136, SKD11 )

     Machining Plastic :

    Delrin (Black, White, Blue, Red, Yellow), Nylon, Neoflon, PTFE, Teflon, Ultem, Torlon, Peek, Acrylic, PMMA, PC, Polycarbonate, PAI, PPS, PA, PVDF, POM, PA, PET, PEI, PE, PVC, PP, ABS, PEP, PS, PSF, PI, PMMI, PABM.

  4 Part Size ( CNC Milling and CNC Turning )

• CNC Milling Parts ( Max ) : Length 1030mm, Width 800mm, Height 750mm.
• CNC Turning Parts (Max ): Diamter 680mm, Length 750mm. The size of the above parts are machined in the workshop.

  5 Tolerance:0.01mm. Minority size:0.005mm. The measuring instrument can measure the dimension precision: 0.01mm.

  6 Secondary Services of Machining Parts

• Assemble 
  
• Plating Zinc Color ( Machining Steel Parts )
  
• Anodize, Anodize color ( Black, Clear, Red, Blue,Yellow, Etc. ), Hard Anodize, Hard Anodize Teflon. ( Machining Aluminum )
• Electroless Nickel ( Machining Aluminum parts, Machining Stainless Steel parts, Machining Brass parts )
• Passivation  ( Machining Stainless Steel parts )
• Sand Blasting ( Machining Aluminum parts )
• Brushed ( Machining Aluminum parts , Machining Stainless Steel parts )
• Bluing and Blackening ( Machining Steel parts )
• Trivalent Chromium Process ( Machining Aluminum parts )
• Welding,brazing and soldering.
• Centerless Grinding and Burnishing