Home> Products

All Products

(Total 648 Products)

  • CNC stainless steel parts

    Min. Order:1 Bag/Bags

    Model No:SS-009

    Stainless steel machining on the tool wear is great, in the machining, to minimize the number of tool changes,cnc machining stainless steel process brings high heat, damage to the tool, affecting the finish. The choice of stainless steel cutting...

  • Turning stainless steel on lathe

    Min. Order:1 Bag/Bags

    Model No:SS-008

    Turning stainless steel on lathe processing of the object is relatively large workpiece.Usually divided into roughing turning and finishing turning,Rough turning selection of low-speed, large cnc turning capacity.Reduce the number of tool and...

  • Turning stainless steel parts

    Min. Order:1 Bag/Bags

    Model No:SS-007

    Turning stainless steel should follow the following principles:Large diameter of the workpiece with a low speed, The workpiece diameter is small with a high speed.Stainless steel turning tool type selection YG8 series.Stainless steel turning process...

  • Machining stainless steel 316

    Min. Order:1 Bag/Bags

    Model No:SS-005

    316 stainless steel containing chemical elements Mo.So the 316 stainless steel machining parts than 303/304 more resistant to corrosion.Commonly used in chemical, oil, underwater equipment.316 stainless steel hardness higher than 304. The same...

  • Machining 303 stainless steel

    Min. Order:1 Bag/Bags

    Model No:SS-004

    303 stainless steel machining is one of the largest stainless steel,High-speed cutting of the product surface roughness can reach Ra1.6. 303 stainless steel machining parts commonly used in processing small precision parts,Including electronics,...

  • milling stainless steel parts

    Min. Order:1 Bag/Bags

    Model No:SS-002

    In the milling stainless steel, the workpiece will swell deformation.The expansion coefficient of stainless steel is 1.5 times that of carbon steel.In the stainless steel milling process, the workpiece is easy to produce thermal deformation,...

  • CNC Milling for Drone parts

    Min. Order:1 Bag/Bags

    Model No:CM-016

    Our quality is more secure, providing 100% of the size of the test for CNC milling machining, more often, will design a reasonable detection fixture to ensure higher quality and higher speed of the size of the test.From the procurement of raw...

  • Precision turning plastic parts

    Min. Order:1 Bag/Bags

    Model No:PL-010

    For all plastic turning, we are divided into roughing machining and finishing machining.We are able to provide high quality mechanical turning products. Our technical staff for each drawing based on the material of the product for detailed...

  • Plastic block for milling

    Min. Order:1 Bag/Bags

    Model No:PL-009

    Plastic cnc milling must control the deformation of the product, We do a lot of auxiliary fixture.Decomposition processing steps. Some milling plastic parts must go through 12 hours before entering the next processing link. Our plastic machining...

  • nylon machining CNC parts

    Min. Order:1 Bag/Bags

    Model No:PL-008

    Nylon machining parts high mechanical strength, good toughness, a higher tensile and compressive strength.Friction coefficient is small, high wear resistance.Nylon density is small, in industrial applications, can replace copper.machining nylon...

  • Best plastic for machining

    Min. Order:1 Bag/Bags

    Model No:PL-007

    We provide high quality plastic cnc service.The technician can control the deformation in plastic machining very well,Product accuracy 0.01mm. Machining plastic Process,Since the hardness of the plastic is low, the machining amount is small.Plastic...

  • CNC machining delrin plastic parts

    Min. Order:1 Bag/Bags

    Model No:PL-006

    Machining delrin Parts has a very high mechanical strength, Self-lubricating and good wear resistance.Density is small, lighter than all metals, Delrin machining parts gradually replace metal products. Delrin machining parts Commonly there are two...

  • cnc machining carbon steel

    Min. Order:1 Bag/Bags

    Model No:MS-001

    cnc machining carbon steel ISO9001:2008 quality system runs through every department.We obtain the best quality of the products from the following points:The accuracy of the equipment.,To meet the product quality of the CNC machining turning...

  • Metal CNC machining services

    Min. Order:1 Bag/Bags

    Model No:MS-007

    This is a cast steel after machining products, used in machine guide. Buildre Group Co., Ltd is a professional manufacturer of CNC and CNC Machining Services and Molding Services for OEM and ODM parts. And through the ISO 9001: 2008 quality...

  • CNC machining metal part

    Min. Order:1 Bag/Bags

    Model No:MS-005

    CNC machining metal parts is widely used, after heat treatment to get a good combination of strength and toughness with the comprehensive mechanical properties: you can make gears, connecting rods, bearings. Our CNC machining steel is divided into...

  • CNC machining metal parts

    Min. Order:1 Bag/Bags

    Model No:MS-004

    Most of the machining metal parts should be heat-treated to increase the hardness of the workpiece, we have specialized heat treatment suppliers to provide products of the second service We have more than 2,600 square meters building workshop. Has...

  • Precision cnc machining services

    Min. Order:1 Bag/Bags

    Model No:CM-018

    This is precision cnc machining services parts. As a precision machining service shop, we machine specialty parts out of any specified material, from standard to exotic. Some of the standard materials from which we CNC Milling machining include...

  • CNC turning stainless steels parts

    Min. Order:1 Bag/Bags

    Model No:TU-016

    CNC turning stainless steels parts with Various stainless steels: 303 / 4305,304 / 1.4301,316. Stainless steels turning parts Dimensional tolerances of 0.01 mm are guaranteed. Stainless steel CNC turning parts has a very good finish. Burnishing...

  • High Precision small turned part

    Min. Order:1 Bag/Bags

    Model No:TU-017

    Our small turn part is the smallest size:ф0.5*1mm. CNC turning center in processing small turning parts, spindle speed 3000RPM. Our CNC Turning Center is equipped with a multi-station turret or power turret. The machine has a wide range of...

  • CNC Machining Aluminum Part

    Min. Order:1 Bag/Bags

    Model No:CM-013

    We offer tens of thousands of CNC Machining Aluminum Parts. We are skilled in a variety of aluminum alloy CNC milling machining. CNC machining including cnc milling and cnc turning, cunting, grinding, milling, sheet metal fabrication. CNC milling...

  • CNC machined plastic parts

    Min. Order:1 Bag/Bags

    Model No:CM-014

    We have a wealth of CNC machined plastic technology. We Machining for Plastic, these include: POM.PA, PC, Teflon, transparent PMMA,CNC machined Plastic is widely used as an insulating material, and its density is small, to meet a lot of light weight...

  • CNC Machining for Drone Parts

    Min. Order:1 Bag/Bags

    Model No:CM-015

    CNC Machining for Drone Parts For CNC Machining Parts for Drone, we set up a team of sales, engineering, quality, and operations workers. Machining for Drone Part has become a new starting point for the factory. We now offer precision machined parts...

  • custom cnc machined parts

    Min. Order:1 Bag/Bags

    Model No:CM-011

    Materials for Customized CNC Machining Parts are included: Copper / Bronze, Aluminum 6061,6063,6061-T6,7075,5052.2017.6082. Steel: Q235,45 #, A3, 718H, S136, SKD11. Stainless steel: SU S303, SU S304, (1.4301), SU S316. Plastic:POM,Teflon,PA,(PA66)...

  • precision cnc turned components

    Min. Order:1 Bag/Bags

    Model No:TU-020

    We have high precision and high stability of CNC turning machine. In the production of precision cnc turned components process, Our workers operate the machine in strict accordance with the process. We have provided tens of thousands of cnc turned...

Related Products List
Home> Products
We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send