Communicate with Supplier? Supplier
Sun Mr. Sun
What can I do for you?
Chat Now Contact Supplier

Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD

Ultem Machined Components - manufacturer, factory, supplier from China

(Total 24 Products for Ultem Machined Components)

  • Ultem Plastic Components Machining Service

    Ultem Plastic Components Machining Service

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-069

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Ultem Plastic Components Machining Service The Ultem machined components material is a non crystalline high performance polymer The mechanical properties long term heat resistance dimensional stability and chemical stability of Ultem machined components are similar to those of other aromatic PI and many aromatic...

    Contact Now

  • Machined Ultem Parts with CNC Logo

    Machined Ultem Parts with CNC Logo

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-101

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machined Ultem Parts with CNC Logo Machined ultem parts and accessories are extremely suitable for electrical and electronic insulating parts including many semiconductor process components as well as a series of structural components These machined ultem parts and accessories require high strength and rigidity at...

    Contact Now

  • CNC Milling Machining Copper Components

    CNC Milling Machining Copper Components

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-059

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Copper Components The milling cutter used for milling machining copper is mainly made of high speed steel and K type hard alloy When milling machining copper and other materials with large plasticity low hardness large cutting deformation and easy to stick the cutting edge of the milling cutter...

    Contact Now

  • Turning Machining Ultem Parts and Accessories

    Turning Machining Ultem Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-100

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Turning Machining Ultem Parts and Accessories Ultem parts and accessories applications has good flame retardant low smoke rate and excellent chemical resistance Ultem parts and accessories applications are crack resistant in methyl ethyl ketone toluene and trichloroethylene Machining ultem rod is similar to other...

    Contact Now

  • Turning Machining Brass Components on A Lathe

    Turning Machining Brass Components on A Lathe

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-058

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    Turning Machining Brass Components on A Lathe Methods to improve the surface quality of brass turning components processed by automatic lathe 1 Reduce the height of residual area In turning machining brass fittings the height of the residual area can be reduced by reducing the main deflection angle the secondary...

    Contact Now

  • CNC Machined Plastic Parts and Accessoried Prototype

    CNC Machined Plastic Parts and Accessoried Prototype

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-092

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machined Plastic Parts and Accessoried Prototype To CNC plastic material end milling cutter should be used In CNC plastic material cutting edge should be sharp water cooled spindle speed should be fast machining center speed is 3000 5000 cutting amount roughing machining 1 5MM per cutter finishing machining use...

    Contact Now

  • CNC Machined Aluminum Telescope Parts With Purple Anodized

    CNC Machined Aluminum Telescope Parts With Purple Anodized

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-199

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machined Aluminum Telescope Parts With Purple Anodized The matters needing attention in the process of anodizing aluminum service are as follows 1 Reasonable control of anodic oxidation process conditions including solution temperature voltage and time 2 In the anodizing aluminum process attention should be paid...

    Contact Now

  • Cnc Lathe Turning Components With Anodized

    Cnc Lathe Turning Components With Anodized

    • Min. Order: 1 Bag/Bags

    • Model No.: TU-007

    • Productivity: 52000/Month

    • Transportation: Ocean,Land,Air

    This CNC lathe turning components is made of 6061 aluminum alloy According to customer s requirements we have made two different blue anodize surface treatments for CNC lathe turning components Machining process CNC turning and CNC cutting first turning then rough and finish machining according to the size tolerance...

    Contact Now

  • Precision CNC Machined Aluminium Parts For Telescope

    Precision CNC Machined Aluminium Parts For Telescope

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-070

    • Productivity: 4600/Month

    Precision CNC Machined Aluminium Parts For Telescope This is a handheld telescope structure bracket Red anodizing of aluminium is used as the surface treatment It can also have a very beautiful color after increasing the anti oxidation and anti friction performance of the surface The bracket needs a certain degree of...

    Contact Now

  • precision cnc lathe turning components

    precision cnc lathe turning components

    • Min. Order: 1 Bag/Bags

    • Model No.: TU-011

    • Productivity: 26000/Month

    • Transportation: Ocean,Land,Air

    We can provide precision machined products from our high precision CNC machining turning center Our machining equipment has the following characteristics 1 High precision Including high precision and static precision the main performance indicators are spindle rotation accuracy precision rail movement sub degree of...

    Contact Now

  • Quality Ultem Plastic Parts Machining

    Quality Ultem Plastic Parts Machining

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-070

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Quality Ultem Plastic Parts Machining Ultem is amorphous PEI Ultem machined parts has the highest resistance to high temperature and dimensional stability as well as chemical flame retardant electrical high strength high stiffness and so on Ultem machined parts is widely used in electronic electrical medical lighting...

    Contact Now

  • Precision Copper Machined Parts

    Precision Copper Machined Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-006

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machining copper include sheet bar Copper has the following kinds C10100 C10200 C11000 and C12200 The copper content of copper is 99 3 or more and is essentially non alloyed copper Copper machined parts has excellent electrical conductivity and thermal conductivity and often used in a variety of conductive equipment...

    Contact Now

  • Custom Machining Stainless Steel Components

    Custom Machining Stainless Steel Components

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-050

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom Machining Stainless Steel Components We should pay attention to every detail of machining stainless steel components such as chamfering Chamfering refers to the process of machining the edges and corners of the custom made stainless steel components into a certain inclined plane Chamfering is to remove burrs on...

    Contact Now

  • Machined Aluminum Parts with Clear Anodized Finish

    Machined Aluminum Parts with Clear Anodized Finish

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-193

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machined Aluminum Parts with Clear Anodized Finish After clear anodized finish the surface of machined aluminum aircraft parts can get a layer of dense film from tens of micrometers to even hundreds of micrometers that is much thicker than natural oxide film This artificial oxide film is then subjected to a sealing...

    Contact Now

  • Rapid cnc Machining Aluminum Components

    Rapid cnc Machining Aluminum Components

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-066

    • Productivity: 4600/Month

    Rapid cnc Machining Aluminum Components This rapid CNC machined components is manufactured by our 4 axis CNC machine With this 4 axis CNC machine three surfaces can be machined at one clamping which greatly improves the efficiency of rapid precision machining The speed of 4 axis CNC machine can reach 20 000...

    Contact Now

  • CNC Machining Teflon Components

    CNC Machining Teflon Components

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-091

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machining Teflon Components No matter what kind of mechanical equipment in order to ensure the normal operation ability accuracy and power consumption of mechanical equipment lubrication is needed to reduce friction factors reduce wear and heat of parts Machined teflon components have low friction coefficient and...

    Contact Now

  • CNC Turning Machining Brass Agriculture Components

    CNC Turning Machining Brass Agriculture Components

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-051

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    CNC Turning Machining Brass Agriculture Components When CNC turning brass the commonly used tool materials are high speed steel tungsten cobalt type cemented carbide and so on For some special turning brass components carbon tool steel and alloy tool steel can also be used as forming tool materials using these...

    Contact Now

  • High Precision CNC Machined Components for UAV

    High Precision CNC Machined Components for UAV

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-062

    • Productivity: 4600/Month

    High Precision CNC Machined Components for UAV Machined components for UAV using aluminum alloy as raw material through advanced CNC machining equipment system accurate calculation customized CNC machined components for UAV can be accurate to 0 01mm Buildre Group has advanced CNC machining equipment which can produce...

    Contact Now

  • Precision CNC Milling Machining Components

    Precision CNC Milling Machining Components

    • Packaging: According to products

    • Min. Order: 1 Piece/Pieces

    • Model No.: CM-061

    • Productivity: 4600/Month

    Precision CNC Milling Machining Components The precision CNC milling machining of precision machined components can not be completed in one process The whole precision CNC milling machining process of precision machined components can be divided into the following stages 1 rough machining stage Most of the machining...

    Contact Now

  • Machining Aluminum Components for Laboratory Equipment

    Machining Aluminum Components for Laboratory Equipment

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-186

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Milling Machining Aluminum Components for Laboratory Equipment This is a aluminum fabrication parts for laboratory equipment In the process of milling aluminum for laboratory equipment we must pay attention to matching the test tube to be placed in it This requires that the accuracy of milling aluminum for laboratory...

    Contact Now

  • Custom Machined Teflon Products

    Custom Machined Teflon Products

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-086

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom Machined Teflon Products The mechanical properties of custom teflon products are good the tensile strength is 21 28MPa the flexural strength is 11 14MPa and the elongation is 250 300 The static and dynamic friction coefficients of custom teflon products with the steel are 0 04 and the friction coefficients are...

    Contact Now

  • Custom Machining Brass Bolts Components

    Custom Machining Brass Bolts Components

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-047

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    Custom Machining Brass Bolts Components Is the standard copper bolt suitable for your product Come and find Buildre Group Co LDT to customize machining brass bolts for you Our technical team has very good experience in machining brass bolt custom brass component machining including machining brass plate brass rod...

    Contact Now

  • Milling Machining Aluminium Components

    Milling Machining Aluminium Components

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-053

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Milling Machining Aluminium Components Many mechanical equipment is made up of a large number of aluminium machined components The errors produced in the machining aluminium components process will be accumulated which has a great influence on the machining quality of the mechanical equipment So in machining aluminium...

    Contact Now

  • CNC Machined Aluminum Flanges Parts for Ducting

    CNC Machined Aluminum Flanges Parts for Ducting

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-055

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Aluminum flanges parts is a connecting part between the pipe and the pipe used for the connection between the pipe end It is also used in the equipment on the import and export of the flange for the connection between the two devices such as the reducer flange Flange connection or flange joint means that the flange...

    Contact Now

Review

Best Price Cialis 20mg

Jan 20, 2020 5

Great price on this Ultem Machined Components !
Rajaonson Harison

Jan 14, 2020 5

Great Ultem Machined Components with reasonable price.
Cindy Bridges

Jan 05, 2020 5

This Ultem Machined Components is good. Also, its price is satisfactory!!
  • Related Information
we should do our utmost to help you. We warmly welcome customers from all over the world to cooperate with us for Ultem Machined Components , Custom Machined Components , Aluminum Machined Components , Best Source has set up a strong sales and after-sales team to provide the best product and service. Best Source abides by the idea of "Grow with customer" and philosophy of "Customer-oriented" to achieve cooperation of mutual trust and benefit. Best Source will always stand ready to cooperate with you. Let's grow together!
"We support our consumers with ideal high-quality goods and substantial level support. Becoming the specialist manufacturer in this sector, we now have acquired abundant practical encounter in producing and managing for Ultem Machined Components , Custom Machined Components , Aluminum Machined Components , We are proud to supply our products and solutions to every costumer all around the world with our flexible fast efficient services and strictest quality control standard which has always approved and praised by customers.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List