Communicate with Supplier? Supplier
Sun Mr. Sun
What can I do for you?
Chat Now Contact Supplier

Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD

Cnc Milling High Speed - manufacturer, factory, supplier from China

(Total 24 Products for Cnc Milling High Speed)

  • CNC Milling High Speed

    CNC Milling High Speed

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-023

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Our machining center can provide High Speed Milling the machine spindle speed can reach 60000RPM CNC Milling Speed High to achieve the effect of Ra0 4 High Speed Milling speed the workpiece will not cause deformation In order to ensure the mirror effect after processing different materials Milling High Speed tool is...

    Contact Now

  • Custom CNC Turning Machining Plastic Parts

    Custom CNC Turning Machining Plastic Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-102

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom CNC Turning Machining Plastic Parts When CNC turning plastic the increase of feed rate and cutting depth will shorten the cutting time and because of the improvement of heat dissipation conditions the decrease of cutting temperature and tool durability is not significant and it will not significantly increase...

    Contact Now

  • High Speed CNC Milling Machining Stainless Steel Parts

    High Speed CNC Milling Machining Stainless Steel Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-063

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Speed CNC Milling Machining Stainless Steel Parts This C shaped stainless steel custom parts is a product logo produced by our company for our customers It adopts the machining method of CNC machining logo After the completion of high speed milling stainless steel the surface of stainless steel custom parts will...

    Contact Now

  • CNC Milling Machining Small Aluminium Spare Parts

    CNC Milling Machining Small Aluminium Spare Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-083

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Small Aluminium Spare Parts Aluminum alloy has good mechanical properties small density good conductivity and thermal conductivity so aluminium spare parts are widely used in industry The strength and hardness of aluminum alloy are low and the cutting load is small Due to the good thermal...

    Contact Now

  • Machined Ultem Parts with CNC Logo

    Machined Ultem Parts with CNC Logo

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-101

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machined Ultem Parts with CNC Logo Machined ultem parts and accessories are extremely suitable for electrical and electronic insulating parts including many semiconductor process components as well as a series of structural components These machined ultem parts and accessories require high strength and rigidity at...

    Contact Now

  • 4 Axis CNC Milling Machining Custom Parts

    4 Axis CNC Milling Machining Custom Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-082

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    4 Axis CNC Milling Machining Custom Parts We use the 4 axis CNC milling machining method for this part Because there are many surfaces to be machined for this machined milled parts it will be more troublesome to use the ordinary 3 axis machining As this machined milled parts is an exterior part we have also finished...

    Contact Now

  • Surface Treatment for Aluminium CNC Parts

    Surface Treatment for Aluminium CNC Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-215

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Surface Treatment for Aluminium CNC Parts There are many different forms of small aluminium parts surface treatment such as sandblasting to form a matte pearl silver surface polishing to form a mirror surface embossing pressing out various textures plating covering other metals spraying covering other non metallic...

    Contact Now

  • CNC Milling Machining Copper Components

    CNC Milling Machining Copper Components

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-059

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Copper Components The milling cutter used for milling machining copper is mainly made of high speed steel and K type hard alloy When milling machining copper and other materials with large plasticity low hardness large cutting deformation and easy to stick the cutting edge of the milling cutter...

    Contact Now

  • 3 Axis CNC Machining Aluminum for Vape Box

    3 Axis CNC Machining Aluminum for Vape Box

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-214

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    3 Axis CNC Machining Aluminum for Vape Box After 3 axis CNC machining machining marks often appear on the surface of aluminum parts for vape box Although it does not affect the accuracy of aluminum parts for vape box it will make aluminum parts for vape box unsightly In this case we will advise the customer to...

    Contact Now

  • CNC Milling Machining Aluminum Parts for Wireless Handle

    CNC Milling Machining Aluminum Parts for Wireless Handle

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-213

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Wireless Handle In milling aluminium alloys the side edge machining requires a high degree of finish which can be solved by using a reasonable cutting speed The main reason for the poor finish of milling aluminium alloys is that the cutting speed is not selected properly...

    Contact Now

  • Easy Milling Machining Green Plastic Plate Material

    Easy Milling Machining Green Plastic Plate Material

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-099

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Easy Milling Machining Green Plastic Plate Material In milling plastic plate material CNC machining is needed when the precision of machined plastic components is high In milling plastic plate material when the feed rate of the worktable is large and the spindle speed of the milling machine is high the machined...

    Contact Now

  • Milling Machining Stainless Steel Parts and Accessories

    Milling Machining Stainless Steel Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-062

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Milling Machining Stainless Steel Parts and Accessories Burr often occurs in 4 axis milling stainless steel parts and accessories which may be due to the material of stainless steel itself or the cutting tool is not sharp enough or the milling parameters are not set properly Burr not only reduces the accuracy and...

    Contact Now

  • Quality CNC Milling Machining Aluminum Products

    Quality CNC Milling Machining Aluminum Products

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-081

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Laser Jig Quality CNC machining is a complex and comprehensive work Quality CNC machining requires many technologies and the advanced technology affects the quality and efficiency of machining The level of quality CNC machining is also directly related to the machining accuracy...

    Contact Now

  • CNC Turning Machining Plastic Products

    CNC Turning Machining Plastic Products

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-098

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Turning Machining Plastic Products Because plastic is softer than metal it is very difficult to maintain tight fit tolerance during or after machining Machined plastic products even if the size is very stable reinforced plastic such as the requirements of tighter fit according to experience it is better to leave a...

    Contact Now

  • High Speed Turning Machining Aluminum Alloy

    High Speed Turning Machining Aluminum Alloy

    • Min. Order: 1 Bag/Bags

    • Model No.: TU-067

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    High Speed Turning Machining Aluminum Alloy In high speed aluminum turning in order to keep the feed rate of each tooth of the tool basically unchanged with the increase of the spindle speed the feed rate must also be greatly increased Skills of turning aluminum alloy 1 The tool of high speed aluminum turning should...

    Contact Now

  • CNC Milling Machining Simple Aluminum Parts Hardware

    CNC Milling Machining Simple Aluminum Parts Hardware

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-212

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Simple Aluminum Parts Hardware We machining this simple aluminum parts hardware with special fixture made by ourself The special fixture is specially designed according to the requirements of the machining procedure of CNC small aluminum parts The positioning elements on the fixture can make the...

    Contact Now

  • High Speed Lathe Machining Stainless Steel Accessories

    High Speed Lathe Machining Stainless Steel Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-061

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Speed Lathe Machining Stainless Steel Accessories Stainless steel accessories parts are usually used to fasten expensive machine parts because of stainless steel accessories parts are beauty durability and strong corrosion resistance In the mass lathe machining stainless steel parts through many tests and...

    Contact Now

  • CNC Turning Machining POM Plastic Parts

    CNC Turning Machining POM Plastic Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-096

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Turning Machining POM Plastic Parts Compared with other engineering plastics the price of POM plastic parts is low but there are some disadvantages of POM plastic parts such as poor toughness large shrinkage low notch impact strength and so on POM material is suitable for making parts with precise dimensional...

    Contact Now

  • CNC Milling Machining Aluminum Parts for Laser Jig

    CNC Milling Machining Aluminum Parts for Laser Jig

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-051

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Laser Jig This is an aluminum parts for laser jig made by our factory CNC milling machining aluminum parts for laser jig is the process of using CNC machine tools to change the shape size relative position and nature of aluminum blank to machining it into aluminum laser jig...

    Contact Now

  • Custom CNC Machining of Austenitic Stainless Steel

    Custom CNC Machining of Austenitic Stainless Steel

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-059

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom CNC Machining of Austenitic Stainless Steel Like other types of stainless steel small parts machining of austenitic stainless steel has the disadvantages of large cutting force high cutting temperature serious work hardening easy to stick to the tool and fast tool wear Our technicians have improved the...

    Contact Now

  • CNC Machining Aluminum Billet Brackets Parts

    CNC Machining Aluminum Billet Brackets Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-210

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machining Aluminum Billet Brackets Parts Advantages of machined aluminum billet brackets 1 light weight Compared with some other iron supports machined aluminum billet brackets are lighter in weight because of the low density of aluminum 2 Natural corrosion resistance Oxygen in the air can react with aluminum to...

    Contact Now

  • High Speed Milling Machining Stainless Steel Accessories

    High Speed Milling Machining Stainless Steel Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-057

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Speed Milling Machining Stainless Steel Accessories Stainless steel accessories parts is difficult to CNC machining which has the characteristics of high strength large cutting force large plasticity easy to work hardening small thermal conductivity and high machining temperature In the high speed machining...

    Contact Now

  • CNC Machining Complex Aluminum Parts and Accessories

    CNC Machining Complex Aluminum Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-209

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machining Complex Aluminum Parts and Accessories The blank of complex custom aluminum parts and accessories is bar pipe or thick plate Most of the surplus is removed after machining complex components and only 1 10 to 1 20 of the original weight is retained finally The material removal is large the original fiber...

    Contact Now

  • CNC Machining Custom Steel Hex Screw Fittings

    CNC Machining Custom Steel Hex Screw Fittings

    • Min. Order: 1 Bag/Bags

    • Model No.: MS-025

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machining Custom Steel Hex Screw Fittings This is a custom steel hex screws which is produced by CNC machining We know that most of the standard screw is produced by the mould but this custom steel hex screws is a fastener specially designed for a certain product It is different from the general standard parts It...

    Contact Now

Review

Horacio Morazzo

Jan 30, 2020 5

This Cnc Milling High Speed is very robust. Heavy duty. The lathe product mount works great and is sturdy.
Ei Phyoe

Jan 24, 2020 4

The packaging is intact, all have not been damaged, especially happy attitude to the details.
Sumit Goel

Jan 13, 2020 5

It is incredible friends, thank you, very fast, very good package, a good Cnc Milling High Speed manufacturer.
  • Related Information
Adhering into the basic principle of "quality, assistance, effectiveness and growth", we have attained trusts and praises from domestic and worldwide client for Cnc Milling High Speed , CNC Milling High Speed , Turning High Speed , We have a big inventory to fulfill our customer's requires and needs.
"Usually customer-oriented, and it's our ultimate focus on being not only one of the most responsible, trustable and honest provider, but also the partner for our clients for Cnc Milling High Speed , CNC Milling High Speed , Turning High Speed , It using the world's leading system for reliable operation a low failure rate it suitable for Argentina customers choice. Our company is situated within the national civilized cities the traffic is very convenient unique geographical and economic conditions. We pursue a people-oriented meticulous manufacturing brainstorm build brilliant" business philosophy. Strict quality management perfect service reasonable price in Argentina is our stand on the premise of competition. If necessary welcome to contact us by our website or phone consultation we are going to be happy to serve you.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List