Communicate with Supplier? Supplier
Sun Mr. Sun
What can I do for you?
Chat Now Contact Supplier

Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD

Custom Aluminum Milling - manufacturer, factory, supplier from China

(Total 24 Products for Custom Aluminum Milling)

  • Precision CNC Machining Aluminium Parts

    Precision CNC Machining Aluminium Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-034

    • Productivity: 2600/Month

    • Transportation: Ocean,Land,Air

    Now with the continuous improvement of people s living standards we often use aluminum parts machining which gives our lives a great convenience We are in the aluminum parts machining of the time to pay attention to detail this way can produce high quality products In some cases we will find that the aluminum parts...

    Contact Now

  • Custom CNC Turning Machining Plastic Parts

    Custom CNC Turning Machining Plastic Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-102

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom CNC Turning Machining Plastic Parts When CNC turning plastic the increase of feed rate and cutting depth will shorten the cutting time and because of the improvement of heat dissipation conditions the decrease of cutting temperature and tool durability is not significant and it will not significantly increase...

    Contact Now

  • High Speed CNC Milling Machining Stainless Steel Parts

    High Speed CNC Milling Machining Stainless Steel Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-063

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Speed CNC Milling Machining Stainless Steel Parts This C shaped stainless steel custom parts is a product logo produced by our company for our customers It adopts the machining method of CNC machining logo After the completion of high speed milling stainless steel the surface of stainless steel custom parts will...

    Contact Now

  • CNC Milling Machining Small Aluminium Spare Parts

    CNC Milling Machining Small Aluminium Spare Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-083

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Small Aluminium Spare Parts Aluminum alloy has good mechanical properties small density good conductivity and thermal conductivity so aluminium spare parts are widely used in industry The strength and hardness of aluminum alloy are low and the cutting load is small Due to the good thermal...

    Contact Now

  • 4 Axis CNC Milling Machining Custom Parts

    4 Axis CNC Milling Machining Custom Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-082

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    4 Axis CNC Milling Machining Custom Parts We use the 4 axis CNC milling machining method for this part Because there are many surfaces to be machined for this machined milled parts it will be more troublesome to use the ordinary 3 axis machining As this machined milled parts is an exterior part we have also finished...

    Contact Now

  • CNC Milling Machining Copper Components

    CNC Milling Machining Copper Components

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-059

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Copper Components The milling cutter used for milling machining copper is mainly made of high speed steel and K type hard alloy When milling machining copper and other materials with large plasticity low hardness large cutting deformation and easy to stick the cutting edge of the milling cutter...

    Contact Now

  • 3 Axis CNC Machining Aluminum for Vape Box

    3 Axis CNC Machining Aluminum for Vape Box

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-214

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    3 Axis CNC Machining Aluminum for Vape Box After 3 axis CNC machining machining marks often appear on the surface of aluminum parts for vape box Although it does not affect the accuracy of aluminum parts for vape box it will make aluminum parts for vape box unsightly In this case we will advise the customer to...

    Contact Now

  • CNC Milling Machining Aluminum Parts for Wireless Handle

    CNC Milling Machining Aluminum Parts for Wireless Handle

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-213

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Wireless Handle In milling aluminium alloys the side edge machining requires a high degree of finish which can be solved by using a reasonable cutting speed The main reason for the poor finish of milling aluminium alloys is that the cutting speed is not selected properly...

    Contact Now

  • Easy Milling Machining Green Plastic Plate Material

    Easy Milling Machining Green Plastic Plate Material

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-099

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Easy Milling Machining Green Plastic Plate Material In milling plastic plate material CNC machining is needed when the precision of machined plastic components is high In milling plastic plate material when the feed rate of the worktable is large and the spindle speed of the milling machine is high the machined...

    Contact Now

  • Milling Machining Stainless Steel Parts and Accessories

    Milling Machining Stainless Steel Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-062

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Milling Machining Stainless Steel Parts and Accessories Burr often occurs in 4 axis milling stainless steel parts and accessories which may be due to the material of stainless steel itself or the cutting tool is not sharp enough or the milling parameters are not set properly Burr not only reduces the accuracy and...

    Contact Now

  • Quality CNC Milling Machining Aluminum Products

    Quality CNC Milling Machining Aluminum Products

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-081

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Laser Jig Quality CNC machining is a complex and comprehensive work Quality CNC machining requires many technologies and the advanced technology affects the quality and efficiency of machining The level of quality CNC machining is also directly related to the machining accuracy...

    Contact Now

  • Machining Aluminum Parts with Diamond Knurling Pattern

    Machining Aluminum Parts with Diamond Knurling Pattern

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-178

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Machining Aluminum Parts with Diamond Knurling Pattern The force of machining diamond knurling pattern on aluminum parts on a lathe is quite large and the workpiece must be firmly clamped When installing the knurling knives the cutter face should be perpendicular to the workpiece and the center of the flower wheel...

    Contact Now

  • High Speed Turning Machining Aluminum Alloy

    High Speed Turning Machining Aluminum Alloy

    • Min. Order: 1 Bag/Bags

    • Model No.: TU-067

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    High Speed Turning Machining Aluminum Alloy In high speed aluminum turning in order to keep the feed rate of each tooth of the tool basically unchanged with the increase of the spindle speed the feed rate must also be greatly increased Skills of turning aluminum alloy 1 The tool of high speed aluminum turning should...

    Contact Now

  • CNC Milling Machining Simple Aluminum Parts Hardware

    CNC Milling Machining Simple Aluminum Parts Hardware

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-212

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Simple Aluminum Parts Hardware We machining this simple aluminum parts hardware with special fixture made by ourself The special fixture is specially designed according to the requirements of the machining procedure of CNC small aluminum parts The positioning elements on the fixture can make the...

    Contact Now

  • Precision Machining Custom Aluminum Parts and Accessories

    Precision Machining Custom Aluminum Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-211

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Precision Machining Custom Aluminum Parts and Accessories Precision aluminum parts and accessories machining is to complete the machining of the main surface requirements according to the machining steps and procedures including the parallelism surface finish surface perpendicularity surface hardness etc so as to make...

    Contact Now

  • Machining Custom Nylon Parts on A Lathe

    Machining Custom Nylon Parts on A Lathe

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-097

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machining Custom Nylon Parts on A Lathe Because custom nylon parts has non toxic light weight excellent mechanical strength wear resistance and good corrosion resistance custom nylon parts is widely used to replace copper and other metals in the manufacturing of bearings gears pump blades and other parts in machinery...

    Contact Now

  • Manufacturing Custom Stainless Steel Products

    Manufacturing Custom Stainless Steel Products

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-060

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Manufacturing Custom Stainless Steel Products Custom stainless steel products has been widely used in food industry medical industry dispensing machine industry and architectural decoration industry because of custom stainless steel products has excellent corrosion resistance formability compatibility and strong...

    Contact Now

  • CNC Milling Machining Aluminum Parts for Laser Jig

    CNC Milling Machining Aluminum Parts for Laser Jig

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-051

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Laser Jig This is an aluminum parts for laser jig made by our factory CNC milling machining aluminum parts for laser jig is the process of using CNC machine tools to change the shape size relative position and nature of aluminum blank to machining it into aluminum laser jig...

    Contact Now

  • Custom CNC Machining of Austenitic Stainless Steel

    Custom CNC Machining of Austenitic Stainless Steel

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-059

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom CNC Machining of Austenitic Stainless Steel Like other types of stainless steel small parts machining of austenitic stainless steel has the disadvantages of large cutting force high cutting temperature serious work hardening easy to stick to the tool and fast tool wear Our technicians have improved the...

    Contact Now

  • CNC Machining Aluminum Billet Brackets Parts

    CNC Machining Aluminum Billet Brackets Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-210

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machining Aluminum Billet Brackets Parts Advantages of machined aluminum billet brackets 1 light weight Compared with some other iron supports machined aluminum billet brackets are lighter in weight because of the low density of aluminum 2 Natural corrosion resistance Oxygen in the air can react with aluminum to...

    Contact Now

  • Custom Machining Small Stainless Steel Parts

    Custom Machining Small Stainless Steel Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-058

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom Machining Small Stainless Steel Parts With the rapid development of aerospace hydraulic communication medical equipment and other industries many high precision multi batch complex shape of small stainless steel parts turn milling compound machining has put forward a great challenge to the machinery...

    Contact Now

  • High Speed Milling Machining Stainless Steel Accessories

    High Speed Milling Machining Stainless Steel Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-057

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Speed Milling Machining Stainless Steel Accessories Stainless steel accessories parts is difficult to CNC machining which has the characteristics of high strength large cutting force large plasticity easy to work hardening small thermal conductivity and high machining temperature In the high speed machining...

    Contact Now

  • CNC Machining Complex Aluminum Parts and Accessories

    CNC Machining Complex Aluminum Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-209

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machining Complex Aluminum Parts and Accessories The blank of complex custom aluminum parts and accessories is bar pipe or thick plate Most of the surplus is removed after machining complex components and only 1 10 to 1 20 of the original weight is retained finally The material removal is large the original fiber...

    Contact Now

  • CNC Machining Custom Steel Hex Screw Fittings

    CNC Machining Custom Steel Hex Screw Fittings

    • Min. Order: 1 Bag/Bags

    • Model No.: MS-025

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Machining Custom Steel Hex Screw Fittings This is a custom steel hex screws which is produced by CNC machining We know that most of the standard screw is produced by the mould but this custom steel hex screws is a fastener specially designed for a certain product It is different from the general standard parts It...

    Contact Now

Review

Patricia Borel

Jan 20, 2020 5

The Custom Aluminum Milling as described. Excellent contact with the manufacturer. I would recommend.
Chris Persad

Jan 12, 2020 5

To my surprise, it looks better than the previous one I bought. I would recommend if you need a Custom Aluminum Milling
Rian Robles

Jan 11, 2020 5

This is an awesome product. I don't think anyone looking for a good Custom Aluminum Milling will be disappointed with this Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD .
  • Related Information
Bear "Customer first, Excellent first" in mind, we operate closely with our customers and supply them with efficient and expert services for Custom Aluminum Milling , Custom Aluminium Milling , Custom Aluminum Machining , we hold an eye on our ever-expanding products range and make improvement to our companies.
"We continue to keep increasing and perfecting our solutions and service. At the same time, we operate actively to do research and enhancement for Custom Aluminum Milling , Custom Aluminium Milling , Custom Aluminum Machining , Our products and solutions are widely recognized and trusted by users and can meet continuously developing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List