Communicate with Supplier? Supplier
Sun Mr. Sun
What can I do for you?
Chat Now Contact Supplier

Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD

High Speed Cnc Machining - manufacturer, factory, supplier from China

(Total 24 Products for High Speed Cnc Machining)

  • High Speed CNC Machining Aluminum Alloy Parts

    High Speed CNC Machining Aluminum Alloy Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-182

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    High Speed Machining 6061 Aluminum Alloy Components Because of its light weight easy deformation and high strength aluminum alloy parts are widely used in the mechanical industry and aviation field Because of aluminum alloy parts high machinability of raw materials the requirements for dimensional accuracy and surface...

    Contact Now

  • Precision CNC Machining 6061 Aluminum Parts

    Precision CNC Machining 6061 Aluminum Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-183

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Precision CNC Machining 6061 Aluminum Parts The aluminum alloy itself is characterized by its soft texture and poor rigidity First when precision CNC machining aluminum the tightening position must be close to the machining position as far as possible and can not rely on the rigidity of the product to transfer the...

    Contact Now

  • Custom Machining Aluminum Centrifuge Tube Heating Module

    Custom Machining Aluminum Centrifuge Tube Heating Module

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-184

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Custom Machining Aluminum Centrifuge Tube Heating Module This is a custom aluminum centrifuge tube heating module Machined aluminum centrifugal tube heating module uses high purity aluminum material as heat conducting medium instead of traditional water bath device The machined aluminum centrifugal tube heating module...

    Contact Now

  • CNC Machining Aluminum Alloy Part

    CNC Machining Aluminum Alloy Part

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-185

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Machining Aluminum Alloy Part The characteristics of aluminum part manufacturing the material is soft but relatively sticky easy to produce built up edge Therefore aluminum part manufacturing has special requirements usually with fine grain pure tungsten cobalt cemented carbide without coating sharp edge and...

    Contact Now

  • Machining Aluminum Components for Laboratory Equipment

    Machining Aluminum Components for Laboratory Equipment

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-186

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Milling Machining Aluminum Components for Laboratory Equipment This is a aluminum fabrication parts for laboratory equipment In the process of milling aluminum for laboratory equipment we must pay attention to matching the test tube to be placed in it This requires that the accuracy of milling aluminum for laboratory...

    Contact Now

  • High Speed Machining of Best Aluminum Alloy

    High Speed Machining of Best Aluminum Alloy

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-187

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    High Speed Machining of Best Aluminum Alloy Tool path selection is a difficult point in the high speed machining of aluminum components Due to the external dimensions of the CNC machined aluminum components and the characteristics of aluminum alloy materials special requirements must be put forward for machining...

    Contact Now

  • Fast CNC Machining Aluminum Service

    Fast CNC Machining Aluminum Service

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-188

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Fast CNC Machining Aluminum Service Custom CNC machining aluminum components have many advantages Therefore the application range of custom CNC machining aluminum components is constantly expanding From the most economical point of view custom CNC machining aluminum components are suitable for following parts 1 Multi...

    Contact Now

  • Turning Machining Aluminum Parts on Lathe

    Turning Machining Aluminum Parts on Lathe

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-189

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Turning Machining Aluminum Parts on Lathe Machining aluminum on lathe is a part of mechanical machining There are mainly two types of machining aluminum on lathe One is to fix the lathe tool to machining the unformed workpiece in rotation the other is to fix the workpiece to rotate the workpiece through high speed and...

    Contact Now

  • Clear Anodized Surface Treatment Aluminum Products

    Clear Anodized Surface Treatment Aluminum Products

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-190

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    Clear Anodized Surface Treatment Aluminum Products This machined aluminum product has been treated with aluminum clear anodized oxidation finish Aluminum clear anodized finish is an important way for the surface treatment of machined aluminum products In the process of aluminum clear anodized finish the machined...

    Contact Now

  • Custom CNC Turning Machining Plastic Parts

    Custom CNC Turning Machining Plastic Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-102

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Custom CNC Turning Machining Plastic Parts When CNC turning plastic the increase of feed rate and cutting depth will shorten the cutting time and because of the improvement of heat dissipation conditions the decrease of cutting temperature and tool durability is not significant and it will not significantly increase...

    Contact Now

  • High Speed CNC Milling Machining Stainless Steel Parts

    High Speed CNC Milling Machining Stainless Steel Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-063

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    High Speed CNC Milling Machining Stainless Steel Parts This C shaped stainless steel custom parts is a product logo produced by our company for our customers It adopts the machining method of CNC machining logo After the completion of high speed milling stainless steel the surface of stainless steel custom parts will...

    Contact Now

  • CNC Milling Machining Small Aluminium Spare Parts

    CNC Milling Machining Small Aluminium Spare Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-083

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Small Aluminium Spare Parts Aluminum alloy has good mechanical properties small density good conductivity and thermal conductivity so aluminium spare parts are widely used in industry The strength and hardness of aluminum alloy are low and the cutting load is small Due to the good thermal...

    Contact Now

  • Machined Ultem Parts with CNC Logo

    Machined Ultem Parts with CNC Logo

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-101

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Machined Ultem Parts with CNC Logo Machined ultem parts and accessories are extremely suitable for electrical and electronic insulating parts including many semiconductor process components as well as a series of structural components These machined ultem parts and accessories require high strength and rigidity at...

    Contact Now

  • 4 Axis CNC Milling Machining Custom Parts

    4 Axis CNC Milling Machining Custom Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-082

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    4 Axis CNC Milling Machining Custom Parts We use the 4 axis CNC milling machining method for this part Because there are many surfaces to be machined for this machined milled parts it will be more troublesome to use the ordinary 3 axis machining As this machined milled parts is an exterior part we have also finished...

    Contact Now

  • Surface Treatment for Aluminium CNC Parts

    Surface Treatment for Aluminium CNC Parts

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-215

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Surface Treatment for Aluminium CNC Parts There are many different forms of small aluminium parts surface treatment such as sandblasting to form a matte pearl silver surface polishing to form a mirror surface embossing pressing out various textures plating covering other metals spraying covering other non metallic...

    Contact Now

  • CNC Milling Machining Copper Components

    CNC Milling Machining Copper Components

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-059

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Copper Components The milling cutter used for milling machining copper is mainly made of high speed steel and K type hard alloy When milling machining copper and other materials with large plasticity low hardness large cutting deformation and easy to stick the cutting edge of the milling cutter...

    Contact Now

  • 3 Axis CNC Machining Aluminum for Vape Box

    3 Axis CNC Machining Aluminum for Vape Box

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-214

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    3 Axis CNC Machining Aluminum for Vape Box After 3 axis CNC machining machining marks often appear on the surface of aluminum parts for vape box Although it does not affect the accuracy of aluminum parts for vape box it will make aluminum parts for vape box unsightly In this case we will advise the customer to...

    Contact Now

  • CNC Milling Machining Aluminum Parts for Wireless Handle

    CNC Milling Machining Aluminum Parts for Wireless Handle

    • Min. Order: 1 Bag/Bags

    • Model No.: AL-213

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Wireless Handle In milling aluminium alloys the side edge machining requires a high degree of finish which can be solved by using a reasonable cutting speed The main reason for the poor finish of milling aluminium alloys is that the cutting speed is not selected properly...

    Contact Now

  • Turning Machining Ultem Parts and Accessories

    Turning Machining Ultem Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-100

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Turning Machining Ultem Parts and Accessories Ultem parts and accessories applications has good flame retardant low smoke rate and excellent chemical resistance Ultem parts and accessories applications are crack resistant in methyl ethyl ketone toluene and trichloroethylene Machining ultem rod is similar to other...

    Contact Now

  • Easy Milling Machining Green Plastic Plate Material

    Easy Milling Machining Green Plastic Plate Material

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-099

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Easy Milling Machining Green Plastic Plate Material In milling plastic plate material CNC machining is needed when the precision of machined plastic components is high In milling plastic plate material when the feed rate of the worktable is large and the spindle speed of the milling machine is high the machined...

    Contact Now

  • Milling Machining Stainless Steel Parts and Accessories

    Milling Machining Stainless Steel Parts and Accessories

    • Min. Order: 1 Bag/Bags

    • Model No.: SS-062

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    Milling Machining Stainless Steel Parts and Accessories Burr often occurs in 4 axis milling stainless steel parts and accessories which may be due to the material of stainless steel itself or the cutting tool is not sharp enough or the milling parameters are not set properly Burr not only reduces the accuracy and...

    Contact Now

  • Quality CNC Milling Machining Aluminum Products

    Quality CNC Milling Machining Aluminum Products

    • Min. Order: 1 Bag/Bags

    • Model No.: CM-081

    • Productivity: 4600/Month

    • Transportation: Ocean,Land,Air

    CNC Milling Machining Aluminum Parts for Laser Jig Quality CNC machining is a complex and comprehensive work Quality CNC machining requires many technologies and the advanced technology affects the quality and efficiency of machining The level of quality CNC machining is also directly related to the machining accuracy...

    Contact Now

  • Turning Machining Brass Components on A Lathe

    Turning Machining Brass Components on A Lathe

    • Min. Order: 1 Bag/Bags

    • Model No.: CU-058

    • Productivity: 4800/Month

    • Transportation: Ocean,Land,Air

    Turning Machining Brass Components on A Lathe Methods to improve the surface quality of brass turning components processed by automatic lathe 1 Reduce the height of residual area In turning machining brass fittings the height of the residual area can be reduced by reducing the main deflection angle the secondary...

    Contact Now

  • CNC Turning Machining Plastic Products

    CNC Turning Machining Plastic Products

    • Min. Order: 1 Bag/Bags

    • Model No.: PL-098

    • Productivity: 7800/Month

    • Transportation: Ocean,Land,Air

    CNC Turning Machining Plastic Products Because plastic is softer than metal it is very difficult to maintain tight fit tolerance during or after machining Machined plastic products even if the size is very stable reinforced plastic such as the requirements of tighter fit according to experience it is better to leave a...

    Contact Now

Review

Susanna Tomas

Jan 29, 2020 5

Good deal, highly recommended!
Manivannan M

Jan 10, 2020 5

Excellence! It’s a perfect purchase for me.
Mrs.ghadak Mohammad

Jan 08, 2020 5

A very kind seller^ - ^
  • Related Information
Each individual member from our large performance revenue crew values customers' requirements and organization communication for High Speed Cnc Machining , High Speed CNC Machining , High Speed Machining , guide and negotiate.
"With this motto in mind, we've got develop into amongst one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for High Speed Cnc Machining , High Speed CNC Machining , High Speed Machining , Upon today now we have customers from all over the world including USA Russia Spain Italy Singapore Malaysia Thailand Poland Iran and Iraq. The mission of our company is to provide the highest quality items with best price. We have been looking forward to doing business with you!

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List