Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Machined Turned Aluminum Boat Components
Min. Order:1 Bag/Bags
Model No:AL-128
Machined Turned Aluminum Boat Components Aluminum boat components selected materials are more stringent , and now more choice is 5083, 5086, 5454, 5754, 6061 and other aluminum products. Aluminum boat components has the following criteria: first, it...
CNC Machining Turning 7075 Aluminum
Min. Order:1 Bag/Bags
Model No:Al-127
CNC Machining Turning 7075 Aluminum In today's society, turning 7075 aluminum parts applications have been very extensive, turning 7075 aluminum parts can be seen both in the aerospace industry and in general mechanical components, of course, this...
Machining Nylon Parts for Electric Brush Holder
Min. Order:1 Bag/Bags
Model No:PL-068
Machining Nylon Parts for Electric Brush Holder Nylon 66 parts has excellent wear resistance, creep resistance and self lubrication, and good heat resistance and low temperature resistance. It is a self extinguishing material with outstanding oil...
Custom Machining Mica Insulation Sheet Parts
Min. Order:1 Bag/Bags
Model No:SM-010
Custom mica insulation sheet is composed of mica paper and organosilicon glue adhered, heated, pressed, the mica content is about 90%, organosilicon glue content is 10%. Custom mica insulation sheet has excellent electrical insulation properties,...
Min. Order:1 Bag/Bags
Model No:PL-067
Machined Custom Delrin Parts Delrin is a smooth, shiny, hard and dense material, pale yellow or white, with a translucent thin part. Custom Delrin parts, which is cheaper than many other engineering plastic parts, is replacing some of the metals...
Machining White Delrin Insulating Ring
Min. Order:1 Bag/Bags
Model No:PL-066
Machining White Delrin Insulating Ring In the process of machining white Delrin, the workpiece will deform because of many factors. In view of these deformation factors, we adopted the following measures in machining white Delrin to prevent...
4 Axis Machining for Communication Terminals Parts
Min. Order:1 Bag/Bags
Model No:CM-010
With the continuous improvement of CNC machining technology, 4 axis machining is very common in our factory. We constantly change equipment, improve product accuracy. We have more than 2,600 square meters building workshop. Has 12 years of...
Min. Order:1 Bag/Bags
Model No:CM-008
5 axis machining means that there are five axes (three linear coordinates and two rotational coordinates) on one machine and can be coordinated for movement under the control of a computer numerical control (CNC) system. 5 axis machining parts used...
Anodizing Aluminum Parts Machining
Min. Order:1 Bag/Bags
Model No:TU-033
This is an anodizing aluminum parts machining. According to the needs of customers , we cut the 6061 t6 aluminum plate into the shape they wanted. And then its surface is subjected to anodic oxidation. Our company can be based on customer needs to...
Laser Engraving Black Anodized Aluminum
Min. Order:1 Bag/Bags
Model No:AL-126
Laser Engraving Black Anodized Aluminum Laser engraving black anodized aluminum is a new engraving technology developed with the development of laser technology. Laser engraving black anodized aluminum is the use of high power density laser beam...
CNC Milling Aluminum for Auto Parts
Min. Order:1 Bag/Bags
Model No:AL-004
Compared with steel and brass, features of CNC milling aluminum: First, soft material, poor rigidity. Second, the elastic modulus is low, these two factors affect the milling of aluminum alloy machining. therefore, in the CNC milling aluminum alloy...
Machining PEEK Plastic Auto Parts
Min. Order:1 Bag/Bags
Model No:PL-065
Machining PEEK Plastic Auto Parts PEEK plastic material because of its outstanding heat resistance, chemical corrosion resistance, radiation resistance, high strength, easy machining, so it has been in the nuclear industry, chemical industry,...
CNC Machining PEEK Plastic Material
Min. Order:1 Bag/Bags
Model No:PL-064
CNC Machining PEEK Plastic Material When designers design PEEK product models or small batch PEEK parts, injection molding is not economical, so CNC machining PEEK is usually used. CNC machining PEEK can use the same equipment technology as other...
Custom CNC Turning Aluminum Parts
Min. Order:1 Bag/Bags
Model No:TU-002
This is custom CNC turning aluminum parts, material: Aluminum-7075. Our engineers have developed a fixture for this custom CNC turning parts to improve the quality and efficiency of our products. It is important to note that custom CNC aluminum...
CNC Milling Machining 7075 Aluminum Block
Min. Order:1 Bag/Bags
Model No:CM-038
Milling 7075 aluminum has a very big disadvantage, that is, easy to deform. This will not only cause an increase in cost, but also a very serious problem in time, so how to solve the deformation problem in milling 7075 aluminum is imperative. Some...
Min. Order:1 Bag/Bags
Model No:SS-003
Machining 304 stainless steel requires more time than 303 stainless steel, tool hardness is higher. 304 stainless steel machining parts larger than 303 stainless steel parts. Common diameter greater than 120mm of stainless steel is 304 stainless...
Turning Machining Blue Delrin Parts
Min. Order:1 Bag/Bags
Model No:PL-043
Delrin is a kind of synthetic resin, also known as polyoxymethylene resin, POM plastic, race steel; is a kind of white or black plastic particles, has the characteristics of high hardness, high rigidity and high wear resistance. The molecular...
Milling Machining Aluminum Car Components
Min. Order:1 Bag/Bags
Model No:AL-125
Aluminum materials are not new to automobile manufacturing, but compared with the past, aluminum car components also show diversity in terms of their manufacturing processes. Aluminum car components more varieties, in addition to casting, extrusion,...
Custom Machined 5052 Aluminum Enclosures
Model No:AL-124
With the rapid development of industry in our country, the demand of machined aluminum enclosure is more and more big. Now many of the shell of electronic products, mainly are machined aluminum enclosures, aluminum products has become one of the...
CNC Milling Machining for Jewelry Boxes
Model No:CM-001
This is a CNC milling machining jewelry box parts, we have done two kinds of village: aluminum, stainless steel. Three colors, aluminum anode red, blue; stainless steel made passivation treatment, precision CNC machining parts 0.02mm. Packaging:...
Min. Order:1 Bag/Bags
Model No:AL-038
The main alloying element of 6061 T6 is magnesium and silicon, with high strength, high hardness (up to HV90 degrees above), good corrosion resistance, weldability, oxidation effect is good, no sand porous, flatness is good, this is the best...
Easily Machined Aluminum Automotive Fittings
Min. Order:1 Bag/Bags
Model No:AL-123
Components of aluminum in the cost, manufacturing technology, mechanical performance, sustainable development and other aspects of comprehensive performance is good, so components of aluminum is now and in the future automotive industry's preferred...
CNC Machined Aluminum UAV Spare Parts
Min. Order:1 Bag/Bags
Model No:AL-122
UAV may not be the most current digital product, but it must be a new and interesting digital device. Machined UAV spare parts is the protection of accessories for the UAV, modern unmanned aircraft has become a hot flow, in order to better control...
Machined Component Parts of a Vacuum Cleaner
Min. Order:1 Bag/Bags
Model No:AL-121
Vacuum cleaner for its simple operation, easy to use the characteristics of the majority of housewives are loved, and now become the family standing appliances, and the machined component parts of a vacuum cleaner is the vacuum cleaner essential...
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.